WEIGHT:
On the positive side of things, I grabbed 2 cheap scales at Walmart and weighed in the bike. With one Gallon of gas, minus the fiberglass numberplate/windscreen, fork oil and rear brake fluid. Bike tipped the scales at
145lbs/66 kg FRONT
132lbs/60kg REAR
Total: 277lbs/126kg
I'm sure...
So unfortunately i did not make round 2 of NEMRR this weekend but made a good amount of progress this past 2 weeks. Here we go:
SEAT AND EXHAUST
I began by finishing off the rough sculpt on the pink foam seat id shaped and covered it in tape and placed it within the fiberglass tank cover. I...
So far this week I got the engine back into the frame and some pieces bolted up. also realized i didnt have a good photo of the seat frame...
Unfortunately these super annoying fuel lines kinked on me over multiple times moving the fuel tank so I've got a 2023 set coming, the newer models use...
Today i stripped everything down again and gave the frame a half assed paint job along with tabs i extended on the fuel tank...
There's a lot more that i just haven't written as I'm tired right now and just want to get out the updates. Lots of photos too.. ill probably proceed in this way of...
SEAT FRAME CONTINUED
Ive never welded aluminum before or fabricated a piece like this but i went for it. Still need to finish a few spots in the tight angle tube intersections and add tabs for mounts/smooth some edges but I'm stoked how its come together... ive wanted to do this for years.
I...
Once I got to this point I moved onto doing something ive wanted to do for a very long time. In 2018 i had the idea to make the seat frame a sperate subframe. I was unaware at the time that KTM did this in 2017 with the duke 390 and 2019 with the rc390. It would be much easier to buy one of...
My bike march 5th 2024:
After selling another project i pulled the bike into my shop and got to work. This will be a track riding/race only bike. Inspired by the KTM moto 3's/ rc8 / various racing bikes i like.
I pulled the engine for a clutch plate change and valve adjustments and relieved...
It's been awhile guys... Id like to be even farther with my build right now before sharing but i have some time to write a bit so here we go!
2024 Update:
In 2018 I decided to go back to school, it put riding the RC390 at the track on hold for 3 years but was worth it as i got my degree aimed...
Ill be trimming my harness up this week, will be sharing a build post with results. I've previously cut out the rear section for the tail lighting because its a track only bike. I will note that when i cut one of the ALARM wires (purple) the bike would not start, i had to resolder the connection...
For $2900 i think u scored dude. Nice, def post around the tech forum for electricals and stuff, figure out exactly what was changed. Enjoy, have fun ride safe!
In case anyone is interested for the future:
As i thought the fuel pump bolt patterns are the same from 2017/2023 model years but the mounting plate for the 2017 places the fuel line assembly in a different position and thus you would need a 2023 plate.
The unit itself also fits within the tank...
Hey all, I'm looking for a rear tank cover for a 22-23 rc390. I see that MotoXpricambi sells a fiberglass piece: https://www.motoxpricambi.com/us/racing-unpainted-fairing-bodywork/14310-tank-cover-ktm-rc390-2022-2024-mxpcrd14310.html
but I don't want to cough up the $80 shipping on top of the...
Part numbers for mounting plate are different but I think that is because they reshaped it to move the fuel
Part numbers for the mounting plate are different but it looks like they reshaped the plate to fit the inline fuel filter differently. I ordered a 2023 Tank should be here end of this...
Hi All,
Does anyone have a 2021-2023 RC390 apart and is able to measure the fuel pump mounting bolt pattern for me? I have a 2017 fuel pump that I want to swap into a 2023 Tank, have checked part numbers and images, it should be the same mounting plate pattern but im not 100% sure and want to...
BUMP. Sorry to you guys i didnt get back to was a hectic time last year. I am in the same position this year finishing and engine build and out of money. Almost ALL of these pieces are still available minus the seat pads and exhaust. Dropping pice everything for $1000 OBO. Message me here or...