Recent content by aardvark9

  1. A

    SOLD! FS: 2017 RC 390 Race/Track, Northern California

    Sorry, it's been sold elsewhere, I forgot to update this post. RGV250 is an awesome bike!
  2. A

    [SOLD] FS: Marchesini Forged Aluminum Wheels

    Thanks for all the interest, the wheels have a new owner.
  3. A

    [SOLD] FS: Marchesini Forged Aluminum Wheels

    The transaction should be taking place Saturday 7/17, if something falls through, I'll update the post.
  4. A

    [SOLD] FS: Marchesini Forged Aluminum Wheels

    PM returned with contact info
  5. A

    [SOLD] FS: Marchesini Forged Aluminum Wheels

    Like new set of Marchesini wheels with Galfer/KTM PowerSports 320mm front rotor and OEM rear rotor. Ceramic bearings as well, the wheels just need a sprocket. These were purchased new in April and have maybe 150 miles on them, no nicks, no bends, etc.. Claimed weight savings of 14 pounds...
  6. A

    SOLD! FS: 2017 RC 390 Race/Track, Northern California

    $6,250 Professionally built late 2017 RC 390 (throttle by wire) by TekMoto in Chico, dyno last year showed 47 rear wheel horsepower (this was on a 415 chain, I've since changed to a 520 O-ring chain); includes the back-cut 5th gear (never pops out of gear), heavy-duty detent spring, shimmed...
  7. A

    The Definitive ABS Removal Thread

    The best I did was to solder in the original ABS connections which resolved the 'ABS CAN Fault' warning and got it back to only 'ABS Failure'. I even went so far as to swap out the ABS electronics from another one purchased on eBay. Getting rid of the CAN Fault got the speedo working but I...
  8. A

    The Definitive ABS Removal Thread

    Just received the service/repair manual and compared schematics for the ABS portion between 2015 and 2017 bikes and there were some changes and the colors and pins have changed. I'm wondering if anyone with a 2017+ bike has done the ABS disabling while retaining the speedo and without errors on...
  9. A

    First Time KTM in Northern California

    Thanks for admittance and hope to be able to learn from and contribute to the forums. I just purchased a 2017 RC that's already been built for racing. I have been running a good number of track days the past 2 seasons on a Triumph Daytona and am looking to possibly race in 2021 in the local...
  10. A

    The Definitive ABS Removal Thread

    New to the RC 390 world but I recently bought a bike that was race-prepped and the ABS disconnected. I'm trying to get the speedometer working again and clear the ABS error. I've found that the ABS module was already dissected and I've got the circuit board connected but I'm not able to locate...
See more
Top