Recent content by brokenbuddha

  1. brokenbuddha

    Need Help Indicators intermittently stop working when engine is running

    I don't know how but now my indicators are working again! I had a similar issue with my radiator fan several months ago... I just stuffed around with the fuses and relays, cleaned out a few connectors with WD40 and the issue has disappeared.
  2. brokenbuddha

    Need Help Indicators intermittently stop working when engine is running

    I changed the date of my check ride so I'll have time for parts to arrive and I did end up ordering a new flasher relay just to rule it out and will probably not be doing anything major until it arrives.
  3. brokenbuddha

    Need Help Indicators intermittently stop working when engine is running

    I'm just hoping to get some advice to diagnose an issue I'm having where the indicators either flicker or completely stop working when the engine is running. The lights on dash which light up when the indicators are on also flicker. I have tried replacing the 15A fuse (F6), should I purchase a...
  4. brokenbuddha

    Used RC 390 2015 Cam Chain Tensioner [Australia]

    Yep, I have sent you my contact details via private message.
  5. brokenbuddha

    Used RC 390 2015 Cam Chain Tensioner [Australia]

    It was about $2000 AUD to replace both the piston and cylinder at the dealership including 8 hours labour and there was a 1 month wait for the parts to arrive from KTM. The issue was piston slap.
  6. brokenbuddha

    Replacement pivot screws for brake & clutch levers

    I just ended up finding a damaged clutch assembly from someone scrapping a totaled duke of similar year for around $15 on eBay. I don’t think it’s a very common bolt and I really had a lot of trouble finding something similar that would fit so I took the easy option and was done with it. If you...
  7. brokenbuddha

    Replacement pivot screws for brake & clutch levers

    I can confirm KTM will only supply a pivot bolt as a complete clutch lever assembly... disappointing.
  8. brokenbuddha

    Cheap & easy DIY radiator guard

    Awesome! The stock radiator guard is only held on by the fasteners they probably use for car bumpers and mine fell out long ago... the holes are probably M7mm and I had no spare bolts of that size and the thing was noisy as hell flapping around from vibrations so I replaced it with a metal guard...
  9. brokenbuddha

    Keyed Gas Cap Options?

    I have a few sets of these I bought on eBay and they are a huge improvement cosmetically
  10. brokenbuddha

    Replacement pivot screws for brake & clutch levers

    Hi people, I just wanted to know if anyone can tell me where to purchase replacement pivot screws for my brake and clutch levers? I’ve been having great difficulty trying to find them and any help would be greatly appreciated.
  11. brokenbuddha

    Orange sides around rear lights under pillion seat

    This is sometimes referred to as a rear under cowl/tray.
  12. brokenbuddha

    What’s this under pillion seat it looks like some kind of bypass in my rc 390 2016

    The ABS light will remain on until you are riding and it's normal to have a solid ABS light while stationary. If you have a flashing ABS light while moving then there is a problem. Check for any blown or corroded fuses. Clean the ABS sensors and rings. Check the ABS sensor wiring hasn't been...
  13. brokenbuddha

    What’s this under pillion seat it looks like some kind of bypass in my rc 390 2016

    This is used for the KTM alarm/immobilizer and doesn't effect the ABS is any way, you can purchase it from a KTM parts distributor.
  14. brokenbuddha

    What’s this in my rc 390 2016

    This is an OBDII connector for the KTM diagnostic tool but you can purchase an adapter and use most generic OBDII devices. I have tried several of the wifi/bluetooth ELM327 clones with varied success but I would recommend taking a look at the Launch CReader V+ fault reader and other Launch...
Top