I have a Cup bike, race track only. They don’t have a working speedometer/ odometer because there are no ABS rings on the wheels, no associated sensors or wiring connected the the ECU. As a consequence the ABS light on the dash is always lit. This is normal, as there is no ABS. I’d sort of like...
If I am understanding you correctly, this is a product of lean angle. You can duplicate the gear/ rpm with the bike vertical, and it doesn't happen. So checking the fuel filter was a smart move, I think I'd be inclined to remove the tank and investigate to fuel pickup, there aren't any blockages...
It seems that a great deal of though, effort and money has been spent on trying to improve the RC’s “deficient” cooling system. SPAL fans, upgraded radiators, even auxiliary electric water pumps. My operating theory at the moment is that these might be solutions in search of a problem.
My Cup...
stretch? seriously? you're putting about 5 pounds of force into that shifter with your foot. Not into a rigid rod that's fixed, either. It's connected to the shift shaft, which rotates. Once you put enough force into the shifter to start the shaft rotating, no way that rod is even flexed/...
Gray Area KTM, a forum vendor, sells them.
https://grayareaktm.store/collections/rc-390-2015-2016
If you REALLY want to sort that sloppy shifter out, try one of these, the shift shaft support he has produced-
https://grayareaktm.store/products/shift-shaft-support
I was skeptical, but this...
Ignore. For anyone that might find themselves in a similar situation, Matt at formula390.com will sell you a
Tyga Step Kit Replacement Sidestand Spacer
STAH-0047C
Problem solved!
I want to put a side stand on my Cup/ Track bike. In order to do that I need the boss on the footpeg bracket that's appropriately angled to mount the side stand. Anyone out there have a broken/ bent/ cracked/ scuffed/ thrashed/ crashed left side footpeg mount? I don't need the footpeg or...
Wanting to install a small round 2.5" tach on my 2015 Cup. Typically these aftermarket tachs have a green wire that's the sensor or trigger wire. The tach is powered up and properly wired, except it doesn't read rpm. I tried to connect the green wire to the coil ground as suggested for typical...
VGC, no major scuffs, warts, especially to the CF heel guards. The scratches on the anodizing will be covered by the bolts/ washers. As best I recall, these are the race version, with no side stand provision. If you're using these on a street bike, you can purchase the STAH-0047C Sidestand...