where to get key blank cut

Chris The Welder

New Member
that seems like a lot a bread to get a key cut. Looking at my key, I don't see why it's such a big deal. Is this something so new or rarely used that the locksmiths just aren't geared up for it? I'll walk before I spend $35 on a key.
 

Fasteddy

Member
Country flag
High security keys = High cost, $69.00 for 2014 ford escape non fob basic key!
Some hardware stores are now getting the newer machines to do them I have noticed...
 

londor

New Member
Anyone bought an RC lately? Wondering if the keycard still says:

Keep this card in a safe place. You will need the code to have a spare key made. Please contact your
KTM dealer if you lose your key.

Why would KTM distribute a card instructing new owners to contact them for something they don't make?
And never did.
Even with the original key and a blank (most) locksmiths cant cut it.
$35 is a bargain. Sounds like it was scribed and cut by hand or such.
Anyone try to "dremel" one?

Lockset is 2 recessed 6M cap screws. LoL.
Why would anybody go through such fun to replace these BS lock(s)

Going now (on my Ninja) to my KTM dealer to get my $100.00 back.
Id return the bike if I could. Its just another shattered dream.
 

RCinBC

Member
Country flag
He said it was a "sidewinder" key, and they are hard to do.

Thanks for the info. Now i know what to ask for.

I found a locksmith about an hour and half's drive away that said he "thinks" he can do it for $45, but only on a weekday. Aaargh!!!
 

RCinBC

Member
Country flag
Is this something so new or rarely used that the locksmiths just aren't geared up for it?

It appears to be both. This kind of key requires a milling machine style key cutting device rather than a grinding style. The one place said the machine was over $20K hence the high cost of cutting a key, he still couldn't cut it though because KTM wasn't a brand that was listed in the software on the machine and the key head is the wrong shape to fit in the key holder to cut it manually... fml
 

londor

New Member
Didn't want to leave you all hanging. So heres the epilogue.
Ninja to Reno KTM. I had all the info about this thanks to fellow RC owners.
So I knew (finally) there wasn't to be an easy solution. Just went to get my $100.

Months before I went into the office with "keycode card, ID, Cash etc. A month later I went back
and they only had blanks. HMMm..
Counter guy said "It Changed" or They changed "IT". Uhh OK... Uhh I just need my deposit then.
There was "kind of" an offer to R&R the lockset. Well its stuck in my garage so id need a big garbage truck err U-haul to haul to the shop.
They mentioned getting a truck and picking it up. Of course I would have to wait because its all on backorder. (No laughing)
A complete lockset available on Ebay, could be here in under 48hrs ...months ago.

No locksmith can make a new one even with the original and a blank and the "keycardcodecard" (OK laugh)
Unheard of in the lock and key business.

I declined their offer. They aren't responsible. Besides why would anyone put another BS lockset on knowing its a kludge. So....
I can cut wires try to hot-wire it. Carry heavy chains to lock it up every time I stop. Drill out the lock? Shear the tumblers? /Shrug.
Actually dont care anymore. Just wanted to thank EVERYBODY on here. Saved me and hopefuly others a lot more grief.
Will be turning in the RC's plates to DMV (non-operating).

Reno KTM is as good of a business (Dealership) as one could want I suppose.
I want to be clear about that. Loud and clear?
They have my respect even though KTM threw it all away. Hope saving 10cents per lockset was worth it.
Seems it was a surprise (Shock and Horror) to the dealers as well as us.

Good thing I bought that Ninja.
A parting heartfelt Fuck YOU to KTM.
/Farewell
 

londor

New Member
Ninja is running great! RC is DEAD. Going to the DMV to NON OPERATIONAL the POS(KTM=POS).
IS this good advertising for POS ktm? Assholes.
How bout a RECALL? OR a class action lawsuit?
Lets review: IN FIVE (5) YES 5 languages on the key CON card. I am ASSURED that KTM (POS)
Blah blah..... Its all LIES.

My brother bought a NEW POS (ktm)350 $12000 or so.
A month later I go over and see he has a USED Honda 450.
What??? He told me "Its more powerful and lighter (also a lot cheaper)"
Its a better bike. Period.

How do I start my bike? So I can take it to the junkyard?
Only criminals and thieves can start it.

IS it GOOD advertising when I say: ASSHOLE (POS) KTM is trounced by a cheaper
KAWASAKI NINJA? Hard to believe. All I know is the Piece of SHIT has been sitting for MONTHS.
Ninja has NEVER let me down. EVER. (SFO to RENO 5 times)

I want to forget I ever saw it. But it sits and sits and sits and sits and sits there.
No solutions. (Keylock on backorder) Beyond Hilarious...
I will keep spreading the word about POS (formerly KTM)
FUCK YOU KTM. I want my money back.
DID I say FUCK YOU KTM (POS)? Assholes.

Go cheapo ninja YAY! better bike and a LOT cheaper.
How do I get rid of this PILE of Crap? U-Haul to the dumps?
WHEEE!! Havin a ball on my KAWASAKI!
FUCK YOU KTM. Everbody happy now?
 

Superpacman13

Supporting Vendor
Vendor
Country flag
Sorry that you are having an issue but based on my information its a problem with your dealer. The key blanks, lockset etc are all available to order. The key switch is only a two prong connection, you can easily jump it with anything. This still leaves an issue with the gas cap and seat I understand but it would at least get it moving for you. Once again sorry to hear your situation, never fun.
 

londor

New Member
You sound like a shill for POS KTM. EFF YOU. Does a blank operate as a key?
I have a multitude of keys. Car keys, Motorcycle keys, Scooter keys, Padlock keys, House keys,
Storage shed keys, ETC.........
ALL of them are able to be copied. ALL OF THEM!!!! UNDERSTAND? ALL of them.
Except one. Guess who..

Explain what was the purpose of this "keycode CON card"? ????
To buy a blank?
IT STATES: LIE LIE LIE,BS... ETC. (IN 5 FIVE LANGUAGES) They knew all along it was a POS.
Everyone that's posted here confirms it. As I slowly garnered the truth of this mess

The DEALER? They were in on this debacle? doubtful. I will bet my rc on it. hehe
Dealers, Locksmiths et all cant do ANYTHING. Its a KLUDGE.
Why would I or ANYONE put this PoS lockset on? I wouldn't have EVER regarded it as anything but
what it is. A PoS. A great way to get stuck without ANY way to get out of it.
Locksmiths cant help EVEN WITH A BLANK AND THE ORIGINAL. Youre Effed.
SOooo Why the assurances with the key CON card? WTF?

Rent a Uhaul, Drag it to the dealer. Wait for lockset (on backorder) R&R Lockset, How much is the bill?
Huh? $2.00? $3.00? How about a $1,000? Right?
Frak around looking for someone on the planet that MIGHT be able to make a $$$$$ copy?.

HOTWIRE?? REALLY? I know that's a sick joke. Asshole Shill. Or your a good-hearted dumbshit.
So the PoS RC is Non-Oped till I chop it up. However,
Im not going quietly. I was CONNED. That's a FACT.

FUCK YOU Piece of Shit (Formerly KTM)
See ya next week!
 

Superpacman13

Supporting Vendor
Vendor
Country flag
Alright, sorry for trying to help. Carry on with your POS.
You sound like a shill for POS KTM. EFF YOU. Does a blank operate as a key?
I have a multitude of keys. Car keys, Motorcycle keys, Scooter keys, Padlock keys, House keys,
Storage shed keys, ETC.........
ALL of them are able to be copied. ALL OF THEM!!!! UNDERSTAND? ALL of them.
Except one. Guess who..

Explain what was the purpose of this "keycode CON card"? ????
To buy a blank?
IT STATES: LIE LIE LIE,BS... ETC. (IN 5 FIVE LANGUAGES) They knew all along it was a POS.
Everyone that's posted here confirms it. As I slowly garnered the truth of this mess

The DEALER? They were in on this debacle? doubtful. I will bet my rc on it. hehe
Dealers, Locksmiths et all cant do ANYTHING. Its a KLUDGE.
Why would I or ANYONE put this PoS lockset on? I wouldn't have EVER regarded it as anything but
what it is. A PoS. A great way to get stuck without ANY way to get out of it.
Locksmiths cant help EVEN WITH A BLANK AND THE ORIGINAL. Youre Effed.
SOooo Why the assurances with the key CON card? WTF?

Rent a Uhaul, Drag it to the dealer. Wait for lockset (on backorder) R&R Lockset, How much is the bill?
Huh? $2.00? $3.00? How about a $1,000? Right?
Frak around looking for someone on the planet that MIGHT be able to make a $$$$$ copy?.

HOTWIRE?? REALLY? I know that's a sick joke. Asshole Shill. Or your a good-hearted dumbshit.
So the PoS RC is Non-Oped till I chop it up. However,
Im not going quietly. I was CONNED. That's a FACT.

FUCK YOU Piece of Shit (Formerly KTM)
See ya next week!
 

londor

New Member
Good news everybody!
When my key was damaged, stolen and lost.
I had to leave my in the shopping mall parking lot
The Costco was in kinda bad part of town. Couldnt afford a tow truk

I figured "Well I cant start it so itll be nice and safe.
I had called 2 different locksmiths that night. They both were able to make keys on the spot!!!
Err...
Whoops, that's every other vehicle Ive ever owned. (So no keys)
So I had to take a $40.00 cab ride home.

Case closed. Problem solved.
The RC was stolen.
Maybe someone just just borrowed it?
Ive been by the parking lot where It was stranded but its not there.

Its all my fault.
I shouldn't have been so careless leaving my bike all alone in
the mall parking lot?
I should have called a locksmith and had a key made.

Anyway, Problem solved
 

hoghead32

New Member
had the same problem here in Florida...first attempt for new key was not successful ....went to Kittles key shop in Ormond Beach/Daytona on Ridgewood and he had no problem using my ktm blank and made the key with ease....also told me it was not necessary to purchase a KTM blank because a ford key blank that fitted my truck works fine...$30 out the door $12.00 my blank the spare that came with the bike is probably sitting in a drawer at previous owners house because to lazy to drop it off after trade.
 
You couldn't afford a Tow truck?

Sounds like you have more important issues to resolve other than a key that wont work :cool:

Maybe your POS job needs changing?
Maybe your POS spending habits need changing?
Maybe your career of bikes needs changing?

Then I wont have to listen to your whining and bitching!

now go back to your honda bland forum
 

RCinBC

Member
Country flag
had the same problem here in Florida...first attempt for new key was not successful ....went to Kittles key shop in Ormond Beach/Daytona on Ridgewood and he had no problem using my ktm blank and made the key with ease....also told me it was not necessary to purchase a KTM blank because a ford key blank that fitted my truck works fine...$30 out the door $12.00 my blank the spare that came with the bike is probably sitting in a drawer at previous owners house because to lazy to drop it off after trade.

Oh that's very interesting and good to know. What kind of Ford truck ie model and year is it since that seems to be the way locksmiths try to figure out if they can cut it. Did they just free hand copy or use some setting on their machine, do you know?
 

zx2slow

New Member
Just had two blanks cut successfully at ACE hardware of all places. Went to several "locksmiths" in town and they all claimed they couldn't cut the blanks.

Rolled into the local ACE on a tip and they duplicated my only key to two factory blanks. They used a twister 2 key machine.

Charged $20 per key and that was less than half of the few prices I was given by professional locksmiths who ultimately wouldn't attempt the job.
 

John390

New Member
Year and model of Ford blank please? This is great information. Also the info on the Twister 2 machine.

RCinBC, there are a couple of great locksmiths here in Chilliwack that I have used professionally many times and they almost always are able to do stuff like this. The only thing I've ever come across that they couldn't do is the Mazdaspeed 6 keycard reprogram. Had to get Mazda to do that, but it was cheap anyway.

Doug's Keymart and Valley Cycle are the places.

PS, an Admin should condense this and put the info in one post and lock it. This may be info that is needed later.
 
Top