bolts

Hi guys! My rc [125, 2017, 2k miles odo], is doing something odd, around 7-8k+ rpm i can feel weird vibrations, its getting worst over time. I did velve adjustment, 3 velves ware off, nothing big but still, chain tensioner looks like its doing it's job, everything is seal, fresh oil, factory...

Hey, While washing my bike yesterday, I realized two bolts are missing. One linking my left-side fairing with my windshield, and one on my powerparts engine guard. I've been trying to find a place online to order these bolts... I can find the first bolt on most OEM parts sellers, but I can't...

So ive had this 390 for a little bit. and im starting to get some annoying issues. My bike has 3000 miles. First the gear shift lever fell off. Recently my kick stand bolt backed out and had to get bolts from ace hardware. Is there something im missing with this bike that bolts keep rattling...

I think I am going to have some +3 mm pistons made. Available for purchase with gaskets (head/base), head bolts and exhaust gasket. I am trying to source a couple used cylinders now so I can have them bored/plated to size on the shelf. If I cant, you guys will be responsible for having your...

Hi all - I recently purchased a 2018 RC 390. I might just be dense here, but I'm finding it difficult to remove the bike's stock windscreen. I was unable to remove the two bolts that are tucked just under the side fairing. I even removed three bolts from the side fairing and still wasn't able to...

Decided to change the oil today (just got the bike few weeks ago 950 miles on it) When removing the lower fairings there's what I'm assuming is some kind of radiator shrouds attached to it. not the one on the radiator but below it attached to the fairings. Upon removing the fairings it fell...

015 - 2016 - 2017 KTM RC390 Street, CUP and DUKE Front Caliper Ti Bolts , set of 2. - Titanium Natural Finish - CNC Machined - Race specs drilled - 50% Lighter and stronger than OEM. - ONLY FOR 320 MM front disc rotors !!! (make sure about your front rotor diameter, I will not...

First of all I have been lurking for a while. Great info here. Are there any other forums worth checking out? Seems that it isn't terribly active here. Here is the bike: 2016 2020 miles PO skipped the first service but changed the oil - needs valves done its definitely a little neglected...

List of Mod's Akro flash bmc air filter (open lid) mivv Ghibli exhaust power commander 5 with a chad map for high comp gasket 42bhp before dyno cometic high comp gasket (permatex used) head and barrel machined 3 angle cut of valve seats and vac tested porting to inlet and exhaust tract port...

I have some parts leftover form my buy-back: Stock lower rear fender passenger pegs tail/plate bracket owners manual and ktm folio replacement body work bolts front axle bolt sparkplugs oil filters It's also time to sell my aim mychron lap timer and beacon as well. Make me an offer

I'd like to put the new 2017 mirrors on a 2015. Will the bolts and wiring plug and play?

where would i be able to locate replacement bolts for the rc390 mirrors?

I'm looking to replace the stock bolts on the front brake caliper for Titanium bolts , Does anyone knows where to find them ? 320 disc version. Cheers.

being that my left mirror broke due to a tip over. I took the rest of it off and took out the bolts until I buy a new mirror. Now that I have a replacement mirror I cant seem to find the bolts I took out. Thought about going to HD to get a set then realized the head and stem are a different size...

For Sale: Brand new OEM wheels + brand new Pirelli rain tires. Also included: front rotor and rotor bolts $750 + shipping from Denver, CO.

So three hours ago i bravely decided that the abs needs to be gone before Fridays sessions. I had ordered new banjo bolts and coppers last week and they arrived so it was time. Seat, tank, side fairings off. Tank, actually just moved aside, Battery out, and battery tray loose. Ignition coil...

. .

Hi, I wanted to switch over to using Titanium/Aluminum bolts wherever I can on the bike, starting with the rotating mass. I was wondering what the sizes of the various bolts are such as the brake rotor bolts and sprocket bolts. Also would be interested in switching over to Titanium Banjo Bolts...

Had a little time to make a proto type piece here to verify fitment and check operation. I am using Frank's captive spacers in the front wheel. Please give me some feedback and or interest in it so I can get a price on having some CNC'ed. Works very well, just loosen pinch bolts and axle and...

What. The. Fuck. I'm trying to remove the OEM exhaust so I can put on the Akra. The bottom forward most bolt is out, but it seems like the exhaust is stuck there. I've got the suspension compressed, the header is completely off the midpipe / cat, and all bolts out. It'll wiggle like crazy...