So I bought A fender eliminator kit and installed it on the 390. After installation only the left turn signal would work because the right wire had been sandwich behind the mount. I freed the wire but now I have NO lights anywhere on the bike, and the engine won’t start. Display turns on no...
OE Windscreen, Clutch Lever, Front Brake Pads
Please also check out my other items.
These are all take offs from a 2015 RC390. It is my understanding that they will all work on 2016s, but please be sure of compatibilty with your bike.
These are either zero or very few mile parts.
KTM OE...
I only ride my RC390 on the street but felt chatter from the stock Metzlers riding hard in Arkansas. I put Bridgestone 020 Evo front and rear. I’ve put rear tires on about 20 different bikes in my life but was unable to get this rear to accept the brake pads. I finally gave up and am riding it...
I am upgrading master cylinder, brake lines, and brake pads. I was wondering if aftermarket front brake rotor, e.g., Galfer rotor, would further improve braking performance over 320mm stock rotor. I am using the bike only for the track and the stock front brake really sucks.
Are there any...
2017 RC390 got laid down this evening. Not much broke, but it's hard finding parts for 2017.
I need a new right side rear mirror, handlebar, fairing, rear brake pedal, and that's pretty much it.
Of these parts , which ones are different from 2015/2016?
I'm not able to find part number for 2017...
I am using my 2017 RC 390 for track. As the track day goes by, my front brake lever becomes spongy and the lever touches the throttle.
I changed brake fluid to Motul 660 this morning in the hope that brake lever feel would get better. The feel is better, but if I put enough pressure I can get...
I am sure this option has been out for a while but I have finally found a source to get the SBS DC compound for our 390's! This is the ulimate brake pad for aggressive track use. Straight from the highest level racers around the world.
The upgrade choice for Superbike, Supersport and...
bikes
brake
carbon
compound
developed
excellent
extreme
heat
high-tech
in-stop
low
option
pad
performance
race
racers
racing
rate
riders
sbs
sport
standard
systems
track
transfer
What's the hose size of the rear brake reservoir? Would this Honda kit work (https://www.amazon.com/GENUINE-HRC-Racing-Reservoir-Fireblade/dp/B00SVEPPPM) for RC 390?
This is my first post I suppose, so hello. I live outside St. Louis, Missouri. I thought for sure I had an account when I first bought the bike a few years ago, but couldn't seem to figure out my info.
Anyways, I need to replace my front and rear brake pads. The bike is not currently with me...
Love My RC. Nothing wrong at all. Just stumbled upon the competition...
Article from the motorcyclist::
What does $5,299 buy you in 2018?
Let's start here:
Kawasaki's Ninja 400 ABS, a sport motorcycle made in Japan. Basic specs include a 399cc engine (from a 70mm bore and a 51.8mm stroke)...
Hi everyone,
I recently started riding and unfortunately had my bike slide at a slow speed. The incident was enough to bend the brake pedal, to the point that the pedal actually touches the bottom frame, not allowing any back brake to take place. I've been struggling to find information on how...
Hey guys,
I'm trying to transfer my brake lever guard from the stock bars to my new Driven clip-ons. The bar end bolt does not fit. Anyone know what size replacement I need to find?
This is the type of piece I'm referring to:
Barkbusters B-027 Bar End Mounting Insert Kit for Hollow 14mm...
So this is a mod I plan to do soon while still winter.
What Brake and Clutch guards are you guys running?
Any tips on a smooth install on an existing RC triple clamp? Please share the tips as this information is somewhat limited.
R&G Brake Lever Guard for KTM RC 390 '17-'18 | Carbon...
My RC Cup came inside of his wooden box with some brake fluid spots on the bottom of the case..... nothing mayor... after a few trackdays one morning the rear master cylinder started leaking.... So I got a used master cylinder on ebay and now is doing the same.... Anyone else had that problem...
This was built no-expense-spared with everything that's allowed in MRA Production Cup and it ended up winning me a couple expert championships and setting a bunch of track records in my rookie year. If you're looking for a fast RC390, you can spend $10,000+ and a shitton of time to build and...
For Sale 2015 RC390 with bill of sale (technically has a title but it's a German title and you cannot title it for the street, nor do I have the street parts). Bike has been a race bike it's whole life. Used Motul/Motorex exclusively on it and changed oil after every race weekend. Frame and...
So I picked up a 2015 RC390 with 1700 miles. I have a few go kart tracks that I'm finding myself more attracted to than full blown circuits. I like sportbikes, and wanted to be able to mix up taking my 690SMC to the track and this.
My main concern with the bike was build quality and...