So clutch pack upgrade, before that a brief view :D
The KTM now gets slip n Assist clutch {3 spring} as default for new and for Old (1st gen) models. The Old (1gen) had a 5 spring clutch pack which was considered really hard on the fingers for few:rolleyes:.
M̳y̳ ̳d̳i̳s̳l̳i̳k̳e̳ on the Slip n...
bought new clutch disks and installed them. When put all back together, the clutch will not engage. I looked on OEM parts diagrams and cant seem to find any parts that I'm missing or things that are where they shouldnt be. I think where my problem lies, is the little "dropper" (part #16 in the...
I've run into this situation where my clutch doesn't disengage while my lever is pulled. I found a few mentions of the clutch nut holding the basket backing off - I ran out of time today and need to get a tool to hold the hub, but based on this picture would you say this is the culprit (still...
Messing around with my 2016 RC this morning I found out I need to replace my clutch cable. It was about to break at the lever. Now, I did remove the cable and thought I would try moving the clutch lever on the engine and put it in gear to see what would happen and it kills it every time I put it...
I’m not sure if this has been discussed or not but can someone tell me why I cannot restart my 2016 RC390 if it stalls while in gear? Pullin the clutch in any gear and it will not start? I end up pulling over to asafe location and putting the bike in neutral before I can restart. Not surewhy...
23,000mi on 2016 rc390. Haven't ridden it much this year because riding an sv650 more frequently. Noticed the past several months that the clutch feels light and seems to have a narrower friction zone than I remembered it having in previous years. Wondering if clutch plates are worn since I tend...
Crunchy is the best way to describe the feedback from the clutch lever... There are a couple of rough spots when pulling in the clutch.
This issue is only when the engine is on, it doesn't occur with it off. The clutch pull feels incredibly smooth with the engine off (the clutch isn't spinning...
hello guys and gals, i have a 2017 with a lil over 7k miles. Lately its been turning off when pulling out from stop light/stop signs. does this mean my clutch is worn,need adjustment,etc????? i was watchimg review videos on youtube about this bike and one guy complianed about turnung off on him...
Hello,
Have anyone else have had these "schreeeching"(?) sound from the clutch during idle?
- I start engine, nothing sounds strange.
- I do a 15 minute session at the track
- Weird 'screeching' sound comes, when i pull in the clutch the sound goes away..
- I let bike cool down for 15-20...
My RC 390 rear wheel moves while on stand and in gear with clutch pulled in. The bike is also very heavy to move when it’s off, in gear even with clutch pulled in. My mechanic said that turning wheel with clutch pulled in is normal. I wanted to check if it’s normal and if not what could be the...
I've read the 2016 models came with a slipper clutch, but saw some conflicting information about what was sold in the USA.
Do American market 2016's have the factory slipper clutch or not?
I'm a sucker for using OEM parts as an upgrade. I would like to shorten up the clutch lever a bit, is it possible to use the lever from a 2017+ rc390/duke?
So I was cleaning my chain today and ask went well until at the end when I decided to turn my bike on while it was on the rear stand. I had it in first gear with the clutch pulled all the way, and then I notice the rear wheel is spinning. I adjust my lever all the way out so I'm pulling the...
I have about 600 miles on my 2017 RC 390. A couple of days ago the engine shut off in traffic in second gear with clutch pulled in, the bike started back when I release the clutch. Today, I just started the bike to warm and it shut off after a minute of idling. I was wondering if this is normal...
Hi everyone, this is my first post and unfortunately it is a tech issue :P
My RC (2017) was bought new and it works pretty well. Today I wanted to rotate the clutch lever downwards a little to fit my hand pose better. So I loosen the level’s screw, rotate the lever a little, and tighten the...
Hi, I own a 2017 RC 390, I experience knocking in my clutch lever from the day one. So far I've drive 1500km on it. I experience a shock(impact) on clutch lever while downshifting the gears. There is a jerk and loud noise when shifting gear from neutral to first.
Can anyone please share your...
2015 KTM RC 390 OEM slipper clutch upgrade cheap
Purchase a clutch pack from a 2016, 2017, 2018 KTM RC390 or Duke 390 (inner clutch hub, friction and steele plates, washers, everything but the clutch basket. You should also get a new gasket for the clutch cover.
USED OEM KTM DUKE/ RC390...
Just purchased an OEM slipper clutch from Ebay from a 2017 KTM RC390.
Will this just be a direct swap for the existing clutch in my 2015?
I am racing the bike this year and tested once and was getting wheel hop while downshifting so thought this would be a good upgrade.
I was also grinding...
Can someone take a picture of their clutch cable down where it attaches to the engine? I didn't take a picture and want to know which way to orient my spring. Thanks.