OK folks... at long last and much begging on my part with the Tyga Factory, we finally have a Keyless tank cap for the RC (and Duke) 390's! I expect this will mostly just appeal to racers, but it'll work on the street as well.
You can find it here:Formula390 - Parts
Cost is ~$56 and I have 6...
390
begging
bike
cap
cost
damn
factory
filler
finally
folks
gas cap
keyless
ktm
ktm 390
ktm rc390
racers
rc390
scratch
stock
sweet
tank
test
tyga
wait
~$56
We are finally getting time to play with the new generation dukes. This is with our test mule 2018 390 duke that is completely stock except for an airbox and a Rapid Bike Evo. Its still getting tuned but right now we are liking what we see! Expect to see some serious additions to our website...
additions
airbox
bike
completely
duke
dukes
evo
expect
finally
generation
https://ibb.co/7z58sv1
liking
mod
mule
play
rapid
serious
shortly
stock
test
time
tuned
website
.
It's been quite a while, but it's finally done.
Dyno Jet Released the 18-023 to fit the '17-'18 RC390 & 390 Duke ... which have ride-by-wire.
Click here to order >> PCV 18-023 <<
That's right! they are finally available again. Ive got a couple on the shelf now after back-orders shipped and more on the way.
By the way they are still marked down to $156.74!!!
KTM Store :: KTM Street Powerparts :: RC390 :: Handle Bar, Instruments and electrical :: MOTION PRO REV-2...
After a couple of months wait, we finally received our order from KTM. pre-orders are shipping this week. If your interested in a kit let us know we only have a few left in stock.
Weighs in at about 7.1 lbs!
No Map Yet but we will have one within the next couple of weeks.
$599.99...
Just picked up a like new RC390 this past weekend! I had a deposit on one at the local dealer here in San Francisco back in 2014, but couldn't justify the $7500+ they wanted out the door when they finally arrived last year so Iv'e been waiting for the prices to become reasonable and my patience...
.
So we've been trying to get these for a long time.
Finally got our hands on them.
These are Brembo High Performance Replacement pads (p.n. 07GR18SC) for the stock calipers.
As most of you have figured out by now, the Stock Calipers are actually made by Brembo.
These are their UPGRADED...
.
Long wait, finally available.
The Yoyodyne Slipper clutch has been released.
Very limited supply.
Hard Anodized with Ball/Ramp Design for ultra smooth travel.
FORUM SALE PRICE - $747
Click here to order: >> KTM PARTS <<
.
Hey RCers,
I finally got the race graphics in and after much debate (because factory looks so good) did it. No regrets. Super high quality decals. Stock ones came off in about 30 with a hair dryer.
also snapped pics with naked fairings because I read several folks wanting to see it.
cheers...
.
Finally got some more of these kits back in stock.
- 320mm Galfer Front Wave Rotor
- Mounting hardware kit (20mm Caliper Spacers, and 70mm Caliper bolts)
Limited Supply.
>> GALFER OVERSIZED WAVE ROTORS <<
.
.
Dyno Jet Power Commander V 18-015
We've been trying to get this video done for a while now.
Finally had some time to edit and publish.
This will be Part 1 of our Dyno Jet Videos.
We will also have videos for the other add-on Modules discussed in the Video...... WBC2/Autotune, as...
.
So after 6 days straight of rain ....... we finally got a chance to get some fly by video and db readings.
https://www.youtube.com/watch?v=WqG9YA9jUmU
.
.
Our Shipment finally arrived today.
Most of us feel the Rear shock is really lacking.
Upgrading to an aftermarket shock is a HUGE Upgrade.
The Ohlins KT303 finally arrived. And we sold through a large majority of them already.
But, we still have a few left in stock.
We can even BUNDLE...
Finally have 700k miles on my rc 390, I don't want to take her to the dealership because I've been seeing post of the prices which seem really $$$$.
First bike so i just know the basics, but i really want to do all the service it needs. Where can i buy everything i need? I checked with oreilys...
So as many have undoubtedly noticed, over the last month or so, Tyga and Formula390 have been in negotiations for a US distribution agreement. Well, a deal was struck, a massive initial inventory stock of parts was ordered, banks wrangled, and I can now FINALLY announce that Tyga USA is a done...
The new Brembo racing SC Brake pads for the front caliper on the 390s are finally here. New Price at $53.00, In stock and ready to ship but only a few left of our first batch after pre-sales.
http://www.ktmperformance.com/brembo-brake-pads-for-the-ktm-rc390-and-390-duke.html
I finally got a little time to play in the shop and snap a couple of pictures as well. Here is the clip-on stub removal and also some replacement heel plates for the PP rearsets. They are a little agricultural, but finally I can smash my foot against the heel plates and not have them squirm...
Just wanted to give the group a heads up. I'm developing an exhaust that will replace the stock exhaust can but maintain the stock location. My intent is to be able to develop an exhaust that will meet (or maybe even exceed) the Akrapovik system, but not have a big can sticking out the side to...