So, I pulled my head to do the titanium valve retainers, and found this
Found my coolant consumption issue. Crazy, because not a single BHG symptom. No overheating, no oil in water. Just a CEL after I installed the rapid bike, and a lot of liquid in my crank case vent.
Glad I pulled this...
Hello all, this is my first post and am very grateful for any knowledge that you can pass on!
About 3 weeks ago I noticed my low beam headlight stopped working but I didn't worry about it too much until now. I bought a new headlight thinking that for some reason the stock one went out, didn't...
I'm fine not a scratch.
So I low sided over the weekend and ground a hole in my stator cover.
I pulled the cover, and in the case I found a short 8mm bolt, but there are no bolt missing from that side of the engine that I can see.
I also found a valve shim on the floor next to the bike.
It's...
So I took my bike in to get the water pump rebuilt. It's been in shop for about a month. They pulled motor off bike and found more issues. Not sure exactly what's going on but I had them send me pictures. Now they are talking to KTM engineers on what they found. How F*cked am I or is it gonna be...
So I took my bike in to get the water pump rebuilt. It's been in shop for about a month. They pulled motor off bike and found more issues. Not sure exactly what's going on but I had them send me pictures. Now they are talking to KTM engineers on what they found. How F*cked am I or is it gonna be...
Just had my tires swapped but when the shop put it back together i noticed some friction on wheel spin on the front, after a visual inspection I found this:
Does that look right to you? did the shop put this together wrong?
Thanks!
Manny :cool:
Anyone know where to find a set for the rc, the rear is an easy find, but the front master I cant seem to locate. Its mandatory in our club to have, so any ideas on what you have done or found would be appreciated.
The Tyga Triple Top and Clipons have arrived and are in stock and available for US shipping now!
The Triple Top is pure artwork, and half the weight of the stock triple:
Paired with the clipons, with the fork clamps specially designed just for the RC390 to clear the bodywork:
These works of...
arrived
art
artwork
bodywork
clamps
clipons
controls
designed
fork
formula390.com
found
half
page
paired
pure
rc390
rearsets
shipping
specially
stock
top
triple
tyga
weight
Unfortunately i dropped my bike again and broke my break pad lever. I bought the stock break lever last time and the material really sucks. I'm looking for a good quality and i found these...
Found a clip of me from someone else's video, didn't want to post the whole 17 min video so here is a gif.
Gfycat - jiffier gifs through HTML5 Video Conversion. Fast, simple gif hosting without size limits.
.
As many of you have found the RC390 Battery door is doesn't always lock securely. Some have even experienced it blowing off while riding.
We spent some time last night fiddling with it, and seemed to have found a solution.
This little trick Should help resolve that.
Please let us know if...
Doing a valve clearance check at the 5K mile mark, found both exhaust valves @ .11 re-shimmed to .15 using a HotCams shim kit.
When putting the cams back in at TDC, there are 2 horizontal marks and a T on the cam gears, the horizontal marks should be level and even with the block and the T...
So ive searched on this airbox lid mod and i have basicaaly found one thread. What i havent found is how to do it or before and after pics. Are people just removing the snorkel only or also drilling holes?
What 10mm rear spools have you guys found? Trying to stay with delrin if possible. I see a bunch of china stuff on ebay. Just not sure if anyone has found and Kawi length sizes that fit since they seem to be primarily 10mm.