hardware

  1. L

    Vegabond tail tidy

    50 shipped to anyone who wants it. Have all hardware and it was used for 900 miles.
  2. N

    Assembly disappointment

    So I have a 16 RC now have about 450 mile on it, been hearing a vibration coming from under the instrument panel. I also had a large smear on the inside of the windscreen that I couldn't reach without taking it off. I used this rainy New England day to take the screen off and see if I could...
  3. KTMPerformance

    We Got Our Hands On The New Marchesini Wheels.........

    One of the best products on market for your KTM, 14 lbs lighter than stock wheels! Superb quality, excellent fit. Comes with sprocket carrier(fits factory sprocket!) and hardware. does not include rotor hardware(OEM will work). We've added a bunch of options available for these wheels too...
  4. B

    body mounting hardware

    I was looking at a few places for mounting hardware for some of the street bodywork but I couldnt pinpoint which bolt in the upper side panel below tank at the rear most point of the side fairing. A bolt and washer worked loose sometime and is gone. I also couldnt find any fork internal parts...
  5. HardRacing

    Galfer 320mm Oversized DF800CWS Rotors & Caliper Mount kits IN STOCK... !! Ltd. Qty

    . Finally got some more of these kits back in stock. - 320mm Galfer Front Wave Rotor - Mounting hardware kit (20mm Caliper Spacers, and 70mm Caliper bolts) Limited Supply. >> GALFER OVERSIZED WAVE ROTORS << .
  6. HardRacing

    Competition Werkes ALL NEW FENDER ELIMINATOR KIT for the RC390 - Sweet

    . Parts arrived. Should have some time this weekend to do VIDEO Install and Review. Sexy Stainless steel plate with Stainless hardware , and a Bright LED Tag Light. Too keep the cost down, the kit utilizes your stock signals.............But, we will be offering Short Stalk Signal Upgrade, if...
  7. Formula390

    Steering Damper hardware which does NOT require drilling

    Racers and street riders have been asking for a steering damper for the RC390, so it's time they got one! Introducing the Formula390 RC Steering Damper! NO drilling of the triple tree or frame required! Initial prototyping for the mounting hardware is complete. We ended up having to abandon the...
  8. M

    Mirror Wedges - Now you can see....

    Forum member Fasteddy has been on us for a while to put these out, and we've finally finished them up... These 6061 hard anodized billet spacers install cleanly under the stock mirror, putting them in a position for a much cleaner viewing angle (lower and wider) on the sight challenged RC...
  9. M

    Passenger Peg Deletes

    6061 billet, hard black anodize, includes stainless hardware. $47 MNNTHBX - Enter
  10. ryandalling

    Race tail and mounting hardware???

    Okay... so the front of the race tail mounts to the tank bolts... I think... and the rear has mount points... but the thing came with no instructions or hardware... anybody have ideas on what they used?
Top