Messing around with my 2016 RC this morning I found out I need to replace my clutch cable. It was about to break at the lever. Now, I did remove the cable and thought I would try moving the clutch lever on the engine and put it in gear to see what would happen and it kills it every time I put it...
Hi everyone ,
Experiencing a bizarre issue after mounting the IRC quick shifter.
Upon hard acceleration, most notably in 2nd gear, there is a momentary fuel cut without depressing the shift lever. It's like it's receiving a signal to shift. I made sure my feet were clear of the lever and...
Hi all. I recently picked up a 2015 RC390 and took her to the track this last weekend. It is GP shift. When I shift it the lever stays where I last put it. So when I shift from third to fourth, or any gear for that matter, I have to nudge the lever up or down to get it into position for what...
I am using my 2017 RC 390 for track. As the track day goes by, my front brake lever becomes spongy and the lever touches the throttle.
I changed brake fluid to Motul 660 this morning in the hope that brake lever feel would get better. The feel is better, but if I put enough pressure I can get...
I'm a sucker for using OEM parts as an upgrade. I would like to shorten up the clutch lever a bit, is it possible to use the lever from a 2017+ rc390/duke?
Hi everyone, this is my first post and unfortunately it is a tech issue :P
My RC (2017) was bought new and it works pretty well. Today I wanted to rotate the clutch lever downwards a little to fit my hand pose better. So I loosen the level’s screw, rotate the lever a little, and tighten the...
Hello everyone, does anyone know where I can get a replacement shift lever with the shift rod as well. I got into a wreck and the rod snapped off from the shift lever. Please and thank you in advance!
Hi, I own a 2017 RC 390, I experience knocking in my clutch lever from the day one. So far I've drive 1500km on it. I experience a shock(impact) on clutch lever while downshifting the gears. There is a jerk and loud noise when shifting gear from neutral to first.
Can anyone please share your...
GP shift on a 2015 RC/Duke 390
I like gp/reverse shifting on my race bikes and while I was waiting for my rear sets to come in the mail I did a few track days testing recently and wanted to covert to GP shift, here’s how I did it without buying any parts.
Remove the small sprocket cover...
Hi all,
Has anyone tried or is running the KTM Powerparts shift lever KTM Store :: KTM Street Powerparts :: 390 DUKE :: Foot Rest :: KTM POWERPARTS SHIFT LEVER FOR 390 ? I see that it has three different positions of adjustment for the step plate and was wondering if these adjustments result in...
Hey guys,
I'm trying to transfer my brake lever guard from the stock bars to my new Driven clip-ons. The bar end bolt does not fit. Anyone know what size replacement I need to find?
This is the type of piece I'm referring to:
Barkbusters B-027 Bar End Mounting Insert Kit for Hollow 14mm...
Getting tired of the terrible front brake lever feel and in consistent bite point I decided to check the runout on the front rotor. I thought it might be runout related because I could pump the lever up to a nice hard brake but as soon as the wheel rotated the lever would be mush again.
Got...
Bonamici Rearset Kit - KTM RC390 (2014-2017)
I'm shopping for new rearset and come across bonamici. According to this photo, it looks like the kit comes with a baffle shift lever which would be great since I hate the flimsy stock one. Does anyone have any experience with this product and confirm?
So earlier today...I was in first gear with the clutch pulled in revs @ 8k RPMs getting ready to launch and all of a sudden my bike stood up in a 12 o'clock wheelie as if I dumped the clutch even though I did not release the clutch it was pulled all the way back to the bar and adjusted...
Hello Everyone.
i've never dealt with a motorcycle clutch before, so i thought i would pick some brains here before taking things apart.
i started feeling looser play in the clutch while at the track yesterday, and it kept getting worse. it basically felt like there was less and less...
I've never owned a bike with ABS before this one. I figured I would just disable it when doing track days? Honestly, after riding it, I don't even notice the ABS (even on the track), so I don't disable it. I have a completely STOCK brake system. My last couple track days the front brake has been...
Brembo RCS15 Brake Master Cylinder gives you the best of both worlds.
Brembo has designed the RCS15 Brake Master Cylinder for the rider who requires more brake performance and variation in brake lever feel when compared to a stock master cylinder.
The Brembo RCS15 Brake Master Cylinder gives...