I have a 2017 that I have a PCV (for the 2017 of course) and a Competition Werkes cat delete pipe. I have not yet installed these 2, as I am unsure about mapping.
Per Dynojet's website, they have a map for a 2017 with an Akrapovic exhaust. Does anyone know if fueling will be ok on my setup...
I am at the track and have acidentially reset my map and I didn’t save a backup of it. I bought my PCV from Chad and was running his map.
Akra
Open airbox
K&n filter
Thinner head gasket
Anyone have it they can email to me? I emailed Chad but not sure he will get it on a sat...
I have 2017 bike ,able to flash before in 2017 for map that I was thinking that it's Akra map , number of this map is km938eu1610301, now I see that it is not Akra map ,not sure what is the map , put on bike powercomander PCV and full sistem exsoust and k&n air filter , on Dyno run is 38hp...
Hello I have a 2016 rc200 with arrow exhaust and K&N air filter and powertronic ecu, with the map that they have in their web site, does anyone have made another map? Or have made other modifications to their bike so it can have more hp or run better?
Hey guys,
First topic:
i have a 2016 RC390 and a 2017 Duke 390. The Duke feels a lot torquier in the midrange and more powerful in general. I'm not sure if that is actually true, maybe is the different riding position etc.
What can i do to check the engine health on the RC?
I adjusted the...
I picked up a 2016. The previous owner had an Akra full exhaust (no cat), a K&N filter and PCV installed by a dealer in North Carolina. I assume they installed the Akra flash when they installed the exhaust. I am experiencing a lot of popping on decel and suspect the map on the PCV is not...
Took my bike to dealer yesterday on my day off gave them the akra map number ending in 7031 they said cant do it as mine has the euro map in it already a 7041 number or something like that anyone know if the 18 changed over adn cant use it wasnt even an option?
I know a few changes came on the...
Went to my dealer last Thursday to have my 2017 RC390 flashed with the AKRA map. Upon waiting for two hours for the "quick" service for this to be performed, I was told that KTM would not allow the map to be programmed with that configuration. The tech told me that, "KTM needs a code from the...
Well slowly but surely this bike is getting ready for next season.
The Tyga bodywork is on, power commander and quick shifter installed, all the street stuff removed and sensors have resistors to avoid check engine lights, oil changed, coolant flushed, valves adjusted and all that little BS...
KTM has finally released their HOMOLOGATED intake runner for the RC390! This little monster will typically net you a 20% gain in top end horsepower, right where you want it for race use! These modifications were all done with a closed air box lid. If running an open lid and performance exhaust...
airbox
assembled
discount
follow
homologated
horsepower
house
injector
install
instructions
intake
lid
map
monster
offer
oversized
race
ready
released
rules
runners
significant
system
top
versions
I took my 2017 RC390 in for the first service and requested the Akra Map, when I picked the bike up they said the flashed the ECU and wrote RM938BU1717401 or maybe RM938BU1212401 on the service order. I thought the Akra map was KM902EV1419031. Anyone know what my ECU was flashed with?
A couple pieces of information that covers several areas. First for all of those who have asked the new high mount Ti akra system on the SSP300 is not and will not be offered as a KTM powerparts exhaust system, in the near future. There is limited quantity for the SSP kits being sold and only...
I finally got out to race the bike today and it felt great until about 1/2 way into the race when it nearly highsided me when it bogged down and seems to stall on corner exit. I was down low in the revs and coming onto the gas pretty heavy and then the bike just gave up and bogged down and i...
Hello! I'm already went to the one of the dealers here in malaysia, and watching my friend's rc3 being remapped by them.. We ask them to select n install the rc cup bike map, but they told me it's only for rc cup bike that have been modified, and they say cannot install it to my friend's bike...
Hello,
I need help with tuning the fuel on my 390. I have mounted akrapovic exhaust (without cat and db killer) and installed bazzaz zfi but since I dont have a dyno anywhere near and the weather is really bad these days to go on a longer trip I need a map that will just give me approximate...
After a couple of months wait, we finally received our order from KTM. pre-orders are shipping this week. If your interested in a kit let us know we only have a few left in stock.
Weighs in at about 7.1 lbs!
No Map Yet but we will have one within the next couple of weeks.
$599.99...
At the moment I own both an RC390 and R3 (I won't get into it). I built and had them tuned the same way, at the same shop, by the same guy. Here's the official results after a proper tune.
KTM is up 5 horsepower and 6ft/lb torque
2015 RC390 (non cup bike):
Full Akra (with baffle in)
PCV +...
So i finally got a chance to install the Tyga exhaust on my RC390 cup, everything bolted up nice and easy and it looks and sounds great, huge thanks to Matt from FORMULA 390 for the great customer service.
The bike was making close to 43hp last time it was dyno, the head was milled .004 inch...
Ok Tyga industries - interested in your new dual pipe systems - Mainly the long can version not the maggot type- Problem is there is no where that I can find and video sound clips plus the data on the website shows a good power gain with mapping
but do you supply the map to go with the pipes...