pin

I know this sounds nit picky but here goes. I removed my foot brake lever the other day to refinish it. I wanted to replace the 2.0mm X 15mm cotter pin that holds the pin in for the bracket on the back of the pedal. Number 25 in the image. I have gone everywhere only to find that no one has...

OE Windscreen, Clutch Lever, Front Brake Pads Please also check out my other items. These are all take offs from a 2015 RC390. It is my understanding that they will all work on 2016s, but please be sure of compatibilty with your bike. These are either zero or very few mile parts. KTM OE...

I am installing driven clip on. I am missing the pin on the throttle side that connects the start-stop switch to the clip on. Any body knows type of the pin and length and diameter of the pin. Can I get it from a hardware store? Also, is the pin on the clutch side switches the same as throttle?

Hi. As above - what's the headstand pin size? Cheers

I installed my power commander today and have two questions. 1. Item 15 in the instructions says to unplug the stock crank position sensor, it's a black 4 pin connector near the FRT, LH side of cylinder head. Picture in instructions shows a 6 pin and a 4 pin connector. I could not find a...

I just wanted to confirm that the black "plug" I see where my front pin clearly goes for a triple tree front stand is in fact just a plug that will pop when I push the pin in. Anyone here have experience with this? I don't want to lift front until I know for sure what this black cover is/how it...

I'm pleased to announce a new product for the Formula390 lineup. This is a frame mounted RAM mount setup. The frame mount utilizes our frame clamp setup from the steering damper, but instead uses a different pin which accepts a RAM Ball. This allows you to mount whatever devices you want, to a...

Racers and street riders have been asking for a steering damper for the RC390, so it's time they got one! Introducing the Formula390 RC Steering Damper! NO drilling of the triple tree or frame required! Initial prototyping for the mounting hardware is complete. We ended up having to abandon the...