pump

Hello, I am looking to fit a Datatool Uno immobiliser to my RC 390 2015 (saves loads on my insurance premium). The immobiliser system isolates a circuit on the vehicle which is switched live (not permanent), such as the ignition coil, fuel pump, or engine management system. When I called up my...

I got a brand new fuel pump that I ordered by accident and cannot return. Money back guarantee it works. Make me an offer. part # 93507088000

I think I am going to have some +3 mm pistons made. Available for purchase with gaskets (head/base), head bolts and exhaust gasket. I am trying to source a couple used cylinders now so I can have them bored/plated to size on the shelf. If I cant, you guys will be responsible for having your...

I am going to be pulling out my water pump and replacing all the gaskets and seals. While hunting around for info I've seen mention of re-loctiting a nut, adding a lock washer and maybe some other things. I did not see any write ups on what things should be done to help improve the water pump...

I ordered this fuel pump by mistake from AOMC and cannot return it. It was removed from the factory plastic for 2 minutes to photograph on a clean counter top and repackaged immediately. I paid $200 for it and am hoping to get $160. I will cover shipping in the US and entertain any offers...

I'm replacing my water pump seals on my2017rc this weekend but have gotten conflicting directions on which way the seals face when installing. The flat side was originally facing inward which is opposite of what I usually see on motors. Does anyone know for sure?

Hey all. So here's the skinny. My frustration is beyond maxed out and I need help. I have a 2016 RC390 with just about 3K miles. It is a track only set up. The water pump gasket went out about two months ago and I got it fixed at the dealer under warranty. I took the bike to the track the...

I started bike for first time in a few weeks and instead of the whining noise the fuel pump makes after turning ignition on, it made a noise like it was having trouble turning. The battery was low on power. I put a new battery in, but the bike will not start. I do not believe the pump is priming...

I am doing the last couple of jobs on my little bike for peace of mind... The first is , I am putting a M6 self locking nut ( with lock tight ) on the water pump so my question is ,, the shaft is it locked ?, like on a gear or would I need to hold the propeller while I undo the nut and put one...

New to this forum, hey everyone! I'm just starting a custom RC390 for a client and this is the first FI KTM I've messed with, so I am looking for some specs on the fuel delivery system. I'm not running the stock tank and I can't graft the pump assembly into the custom tank due to its size and...

First post on this forum, hey everyone! I'm just starting a custom RC390 for a client and this is the first FI KTM I've messed with, so I am looking for some specs on the fuel delivery system. I'm not running the stock tank and I can't graft the pump assembly into the custom tank due to its...