2015 RC390 Race Bike For Sale
Setup for racing and track days. Never been down. 1300 track miles on odometer. Title in hand.
Located in Dallas, TX. $5,800
Engine:
Head Gaskets replaced with Chad Wells' Commonwealth Motorcycles units
Impeller nut on coolant pump replaced with locking nut...
Hello from Kansas City.
Picking up a track dedicated rc390 tomorrow. Currently ride a 690 and a Multistrada. The 690 is about the most fun bike I've owned and I'm really looking forward to the 390 on the track. Currently on a SV650 for track but really don't mesh well with it.
...as in riding off into the sunset, so to speak.
Haven't been that active on the board in the last more than a little while. Unfortunately that corresponded to the RC spending more time idle than it deserved. With that as a premise, the little beast is headed to a new home. I was apparently...
I have medium rear (140mm) and soft front Dunlop slicks. I ride in B group and use tire warmers. How many track days would these last on intermediate pace? Does it make sense to use them till the wear bars?
I know slicks are overkill, but I use them anyway for better grip.
I am at the track and have acidentially reset my map and I didn’t save a backup of it. I bought my PCV from Chad and was running his map.
Akra
Open airbox
K&n filter
Thinner head gasket
Anyone have it they can email to me? I emailed Chad but not sure he will get it on a sat...
Hey all - working through my mod list to get ready for my first track day on the RC390 (2018). I’ll be at RA in a few weeks but out of town for work for a bit...
question - if I unplug / remove the blinkers, tail light, and headlight, do I get a dash warning? Is it a separate warning than the...
This may be a little odd as I'm not sure even how to ask the question correctly.
First off I'll say, "I understand set up is always a compromise, if I set gearing to optimize one part of a track, it may detract from another".
I'm a club racer and basically all my riding is done at one track.
I...
Bought this 18 a few months ago and got it track ready and I was very pleased at my first track day at NJMP Thunderbolt. A few pics.
This was only my second time ever on the track and I had way more fun on the RC than I did on my Street Triple last time. Can't wait to get out again. I need to...
I just wanted to give a shout out to the incredibly helpful supporting vendors and their businesses.
Specifically, I wanted to thank Matt@formula390
I tucked the front during a track day this weekend and needed some replacement parts for a Tyga rearset.
Through 8:00pm on a Sunday Matt was...
I own a 2016 KTM RC390 in India and recently an Indian giant TVS has launched a bike jointly with BMW , RR310.
the bike is more balanced as compared to the track monster the RC is.
I engaged front ABS quite a few times on track after straights; I didn't even realized that I am braking hard and it didn't felt that I am braking hard, but the ABS still engaged. Is the ABS on 2017 RC 390 conservative, so it turns on before the wheel locks up? I am removing ABS, so I wanted to...
I am using my 2017 RC 390 for track. As the track day goes by, my front brake lever becomes spongy and the lever touches the throttle.
I changed brake fluid to Motul 660 this morning in the hope that brake lever feel would get better. The feel is better, but if I put enough pressure I can get...
Hello from France.
Sorry for my French accent ("but it's so cute!")
I plan to describe here the motivation, evolutions, and feedback about my RC390.
I will try to update this first post with the complete list of changes done, and link to individual description and feedback (or at least a...
Well, I've been lurking and posting for a little while now and I'm ready to introduce myself. I've recently purchased an 18 RC from another member from the site that was injured and was no longer able to enjoy his RC. He gave me a great deal and I thank him. He had a few tasteful mods but I have...
I was on track yesterday and my RC 390 stalled a few times in turns on high speed. It felt like the rear wheel stopped for a moment and then started back again. I wanted to check if this is the typical RC 390 stalling problem or this could be something else?
I recently removed the kickstand and...
Looking for suggestions for a full or a 3/4 cat delete exhaust system for my 2017 RC track bike. Sounds like the stock exhaust will drag so this will need to get replaced sooner rather than later. I’ve searched on the forum and see that Tyga makes the only true full exhaust that’s an...
Understanding the value of removing the stock side stand before I regret not doing so, I nevertheless really want some way of supporting the bike when I stop. I'm not keen to seek out a wall to lean against. And when it comes time to put up the bike on a proper paddock stand, I again would...
Some top secret upcoming GAK products. We are working overtime to get products like this to you by season. Every product is developed in house to make your life at the track better!
Hello RC owners. My name's Paul and in Omaha, NE. I'm a long time forum lurker but I think I'm finally decided an RC390. I'm looking to get back into track riding after a few years off and narrowed the candidate for a track bike to a Ninja 400, an R3 or an RC390. I had several track bikes...
I am sure this option has been out for a while but I have finally found a source to get the SBS DC compound for our 390's! This is the ulimate brake pad for aggressive track use. Straight from the highest level racers around the world.
The upgrade choice for Superbike, Supersport and...
bikes
brake
carbon
compound
developed
excellent
extreme
heat
high-tech
in-stop
low
option
pad
performance
race
racers
racing
rate
riders
sbs
sport
standard
systems
track
transfer