upper

  1. B

    Aftermarket clipons and upper triple clamp

    For those of you running aftermarket clipons.. do you guys get the ones with risers to get the feel of the stock clipons? For instance I see woodcraft and vortex offer the 3” or 4” riser with the clipons but Tyga just has 6degree slant on theirs.. I had a crash at the track and bent my triple...
  2. Tom

    Upper radiator hose kink?

    Hello all, I decided to replace the green stuff with the factory suggested Motorex M3.0, I figured I may as well sleeve my radiator tubes while the bike is apart. I just finished putting heat sleeve on my radiator hoses, and I think I may have made a kink in the upper radiator hose during the...
  3. G

    Tyga upper fairing kit - street version

    Hi, I was wondering if anyone here has fitted the Typa upper faring street version Kit, Upper Fairing, Street, (GRP) TYGA EYES KTM, RC125, RC200, RC250, RC390 | TYGA-Performance and if so if they could comment of the overall quality and ease of fitment. The kit looks really good but is quite...
  4. mdabyo

    what bodywork does everyone run?

    I have the tail and lower and race screen right now with the stock sides. I am not a fan of the idea of how those sides will survive a lowside so am wondering what everyone is running? Hotbodies has the upper for about 299 which does not seem bad, wondering what else people are running and opinions?
  5. S

    Torque for upper and lower triple clamps

    Anyone know the torque specs for the upper and lower triple clamp bolts? Just got forks back after Andreani Kit install and need torque specs. If you need a very good suspension guy go to Kent at GMD Atlanta. About Us
  6. Formula390

    Steering Damper hardware which does NOT require drilling

    Racers and street riders have been asking for a steering damper for the RC390, so it's time they got one! Introducing the Formula390 RC Steering Damper! NO drilling of the triple tree or frame required! Initial prototyping for the mounting hardware is complete. We ended up having to abandon the...
  7. micah360

    checking the chain tightness

    In the manual, it says that to check the tension of the chain, the upper chain section must be taut when you check the play on the lower section. So does that mean that you push up on the upper chain section until it's tight, hold it tight, and then check the play on the bottom section? When I...
  8. G

    Vortex Clip ons

    51mm 7 degree units installed. I think I'm going to mod the upper triple to eliminate the factory bar mounts
  9. S

    RC390 aftermarket hard parts?

    Wondering if anyone has been able to find on ebay, etc any aftermarket hard parts available for the RC390. (I've been searching UK and India) I'm particularly interested in the upper triple clamp. It seems that both the street and cup bikes have the handlebars inserted into the upper triple...
Top