mdabyo
Member
Firstly bike is located on the east coast of Canada, but can arrange shipping if needed.
Price $5000
- Bike (clean Ontario title, never registered here as it was a track bike from new)- Andreani Cartridges- JRI Rear Shock- Top-end engine upgrade with KTM performance valve spring kit (includes new single valve springs, valve stem seals, hardened spring seats, keepers and Ti retainers) installed by Pro6 Cycle. Page Not Found Thinner head gasket (professional done that i have races 2 years and had NO head gasket issues!!!!)- akrapovic exhaust- KTM PowerParts race bodywork including fiberglass under-engine fairing, race solo seat and windscreen “racing bubble” front fairing.- K&N filter- PCV with Chad Wells Map- quick shifter (gp)- Manual Timing chain tensioner (needed as the stock is crap)- Factory Pro F-Pro microbearing Pro Shift Kit includes hybrid ceramic microbearing detent arm and a slightly stronger F-Pro blue shift spring that make shifting quicker and virtually eliminates missed shifts. Page Not Found driven clipons- driven tripple tree- Pazzo levers- Keyless ignition and motion-pro starter switch.- KTM performance ABS bypass stainless steel brake lines and Vesrah brake pads.- KTM PowerParts adjustable rear sets with GP shift. modified to take Vortex pegs, did not like KTM ones
- auto bleeder screw on front caliper (the most amazing thing ever, just open and pump brakes to bleed!!!)- 520 race chain and aluminum rear sprocket +1 tooth- spare front -1 sprocket- motohose rad hoses with thermostat delete- Customized air box for the RC 390 with an ultra high performance air tube installed. huge top end gains with this modification https://store.grayareaktm.com/product-p/93806015044.htm- T-Rex frame sliders- rear Stand- Fresh 300V oil change
Price $5000
- Bike (clean Ontario title, never registered here as it was a track bike from new)- Andreani Cartridges- JRI Rear Shock- Top-end engine upgrade with KTM performance valve spring kit (includes new single valve springs, valve stem seals, hardened spring seats, keepers and Ti retainers) installed by Pro6 Cycle. Page Not Found Thinner head gasket (professional done that i have races 2 years and had NO head gasket issues!!!!)- akrapovic exhaust- KTM PowerParts race bodywork including fiberglass under-engine fairing, race solo seat and windscreen “racing bubble” front fairing.- K&N filter- PCV with Chad Wells Map- quick shifter (gp)- Manual Timing chain tensioner (needed as the stock is crap)- Factory Pro F-Pro microbearing Pro Shift Kit includes hybrid ceramic microbearing detent arm and a slightly stronger F-Pro blue shift spring that make shifting quicker and virtually eliminates missed shifts. Page Not Found driven clipons- driven tripple tree- Pazzo levers- Keyless ignition and motion-pro starter switch.- KTM performance ABS bypass stainless steel brake lines and Vesrah brake pads.- KTM PowerParts adjustable rear sets with GP shift. modified to take Vortex pegs, did not like KTM ones
- auto bleeder screw on front caliper (the most amazing thing ever, just open and pump brakes to bleed!!!)- 520 race chain and aluminum rear sprocket +1 tooth- spare front -1 sprocket- motohose rad hoses with thermostat delete- Customized air box for the RC 390 with an ultra high performance air tube installed. huge top end gains with this modification https://store.grayareaktm.com/product-p/93806015044.htm- T-Rex frame sliders- rear Stand- Fresh 300V oil change
