Bak5

New Member
I just got my rc yesterday and i noticed the batery cover keep sliding off i tried to cut the aprings and still not locking right,im new here so have patience with me
 

Formula390

Supporting Vendor
Vendor
Country flag
Is the pull wire under the seat returning after it's pulled or is it binding? It may just be that the cable isn't allowing the lock to snap the metal U into place.

Welcome to the forum and the RC! If you've got any questions or problems, ask away! :)
 

mattv

Member
Country flag
The battery cover has never gone on easy for me. I give it a tap with a rubber mallet or hit with my palm [FONT=&quot]¯\_(ツ)_/¯[/FONT]
 

antarius

New Member
^^ That's what I did, noticed it the first time I took the cover off. Cool that a video exists.

Anyway, it works... just cut a coil or two off. I only cut one, and it works fine now.
 

John390

New Member
thinking that maybe one could also free up the friction on the pivot? if that other pivot moved easier, maybe the factory spring would be strong enough?
 

Bigreddog

New Member
Country flag
The battery cover is a shocking design...this is the solution i came up with on my race bike.
 

Attachments

  • 106589838_593485141302596_4786934102143085897_n.jpg
    106589838_593485141302596_4786934102143085897_n.jpg
    122.7 KB · Views: 29
Top