Abs removed bike won’t start

Stumpi99

New Member
Country flag
Hey guys n gals.
I have an RC that I’m race prepping.
I have removed the ABS completely, hoses, and unit, everything and I’ve got a dead bike now.
When I turn the key on everything powers up, fuel pump primes, dash lights up all good but pressing the starter button gives me nothing.
What am I missing?

full disclosure, I have also removed the LHS switch gear and all associated lighting wiring. As a result, the icons on the RHS starter switch do not light up any more, not an issue but am wondering if there is no an earth or power issue to that switch gear..

would really appreciate some guidance if anyone knows what I may have missed.

thank you all…
 

Falkon45

Member
Country flag
I know that if the light fuse is pulled, the bike won't start. You may have to make a jumper to send power to the non existent lights
 

Stumpi99

New Member
Country flag
So, it appears that in my removal of the switch gear and lights that I removed the power tto the RH switch gear... Which meant the little lights were not illuminating..
I restored power to it and hey presto, bike starts and runs.. Go figure...
 
Top