How do I remove the head light ?

[Lemans_72]

HI

I am about to fit the race front faring from Tyga

But I have no idea how to remove the head light.

Anyone ?!

 

[isaac_]

HI

I am about to fit the race front faring from Tyga

But I have no idea how to remove the head light.

Anyone ?!

My suggestion if you're doing this is to remove the entire stock fairing stay and go with a Rottweiler performance stay.

 

[Lemans_72]

My suggestion if you're doing this is to remove the entire stock fairing stay and go with a Rottweiler performance stay.

Just want to remove the light before to fit the Tyga part

Already took off the stock fairing.

Just light to take off now

 

[isaac_]

Just want to remove the light before to fit the Tyga part

Already took off the stock fairing.

Just light to take off now

I swapped the entire stock fairing stay for the after market one. Looking at the assembly the lights are a pain to take off, but looks doable. With patience. Sorry I don't have more than that.

 

[Lemans_72]

So I went on this morning took off few bolds and managed to take of this light section.

I didn't had to open the all block. Just took off the bolds, open gently and the light section came off. I first took off the bulbs out, then disconnected them to put it back inside the light section.


By the way this bold was a pain to take off
>


Et voila !


Now the Question is:
To fit the TYGA nose, do I need to keep this section in (and take off the two lights from it ) ?


I m Asking because it does has 4 bolts that are joining to the main head section
Or I just cable tie !

PS: I have no idea why my pics are rotated !

Cheers !