So I had some time today to confirm that the rollover sensor which uses the same +5VDC source as the side stand can be bypassed in the same way with a 3.3k ohm resistor between the red/blue (+5) and brown/green wires on the main harness side.
View attachment 3897
So I had some time today to confirm that the rollover sensor which uses the same +5VDC source as the side stand can be bypassed in the same way with a 3.3k ohm resistor between the red/blue (+5) and brown/green wires on the main harness side.
View attachment 3897
Thank you so much! I can see the sensor after removing the fairings but I couldn't see an easy way to get to the sensor. Do I have to remove the tank or all the battery box and everything? I couldn't find any youtube video either.Behind the headstem under the battery box