So I went all in and built a hyper 390... started with a brand new 2017 390..

at over 20,000 its probably the most modded 390 out there

PCV, Wideband O2 w/ Autotuner and quick shifter
Andreani fork kit and Ohlins KT303 46HRCL rear
Driven Triple Clamp and Clipons
Hot Body race body and Tyga nose, carbon rear fairing, belly pan Tyga race stay
RCS15 master cylinder, steel brake lines, galfer 320 wave rotar,(and remove ABS)
Lithium 4 cell Antigrativy
DID chain and sprockets
Commonwealth engine kit (head, valves, piston, gasket, cams, fuel injector, spark-plug and race shifter kit)
Dyno tuning
BST Carbon Fiber Wheels with ceramic bearings

still tweaking and tuning.. initial tires Pirelli race slicks 100 front 160 rear

Big weight reduction.. dropped from 320 lbs wet (160-front/160-rear) to 274 (144 front/130 rear)

Horsepower and torque still being tweaked

Thanks to Joe Brewster, Ryan, Ronnie and Alex at WMR, the best KTM dealer in Florida, Leonard and Priscilla at HardRacing for all the parts, Paul at Tyga for stay and carbon and Chad at Commonwealth for the engine kit.

First day at the track (Homestead) still have a lot of tweaking to do..


https://www.youtube.com/channel/UCKJ4nad_jUsVoVmGErG9G8w?view_as=subscriber




https://www.rc390-forum.com/forum/members/eric-ausen1-gmail-com/albums/rc390x/
 

Attachments

  • 31444909_10213354269826296_1519185908903968768_n.jpg
    31444909_10213354269826296_1519185908903968768_n.jpg
    937.6 KB · Views: 276
  • 31396670_10213354429990300_6818039185425825792_n.jpg
    31396670_10213354429990300_6818039185425825792_n.jpg
    432.4 KB · Views: 270
  • 31512117_10213354369468787_690406986285580288_n.jpg
    31512117_10213354369468787_690406986285580288_n.jpg
    1,007.3 KB · Views: 306
  • 31564172_10213364677166473_6061650931559170048_n.jpg
    31564172_10213364677166473_6061650931559170048_n.jpg
    800.8 KB · Views: 368
  • 31490505_10213354368708768_7308562860521553920_n.jpg
    31490505_10213354368708768_7308562860521553920_n.jpg
    927.6 KB · Views: 256
Last edited:
Thanks

The side panels are half the weight of the stock parts and are a single integrated fiberglass panel and the front fender are hotbodies and available here. I did not use the HB nose

https://www.sportbiketrackgear.com/hotbodies-racing-ktm-rc390-15-16-race-bodywork/

The nose is a Tyga nose and they custom made it for me without headlight openings (they infilled them). They also included a matching windscreen. Also the CF chain guard and rear fender is an integrated light weight piece that looks great. The tail section and belly pan (not installed yet) are Tyga Carbon Fiber

The tank is a stock tank painted.. color does not photograph well.. in person its stunning... the color is florescent (road cone) orange

Tyga link here

Kit, Upper Fairing, Street, (GRP) KTM RC 125/200/250/390 | TYGA-Performance

If you race talk to both directly for special offers
 
Thanks

The side panels are half the weight of the stock parts and are a single integrated fiberglass panel and the front fender are hotbodies and available here. I did not use the HB nose

https://www.sportbiketrackgear.com/h...race-bodywork/

The nose is a Tyga nose and they custom made it for me without headlight openings (they infilled them). They also included a matching windscreen. Also the CF chain guard and rear fender is an integrated light weight piece that looks great. The tail section and belly pan (not installed yet) are Tyga Carbon Fiber

The tank is a stock tank painted.. color does not photograph well.. in person its stunning... the color is florescent (road cone) orange

Tyga link here

Kit, Upper Fairing, Street, (GRP) KTM RC 125/200/250/390 | TYGA-Performance

If you race talk to both directly for special offers
 
Top