Hi,
Ive just bought my first RC390 and I love it!
I am short in the leg and could do with dropping it an inch.
If I tighten up the suspension coil, will this give me the result I need?
if so, what C wrench should I get (unfortunately no tools came with it)?
Thanks
Does anybody tried or have this installed ? I will like to know more about it.
https://www.yamamoto-eng.co.jp/item_detail/sf/0/0/0/0/2/497/mu/
For what I understood , 4.2kgs (... no idea of akra weight) it has the lower route with a kit of fiber lower cowl included, but no dyno figures...
Hey everyone!
New to the forum, thanks for allowing me to post!
I am 5'4 and I tippytoe on the bike. Some people tell me this is OK and others tell me its not a good idea. The dealership I bought it from recommended to adjust the spring which will lower the height but I am worried that it will...
Introducing our first designed and developed in house product! The simple and subtle rear tank mount! No its not much and won't make 15% gains like our air tube but it does make life easier. I was tired of having to pull the fuel tank to clean my air filter so I made a fix, this bracket is that...
air
box
bracket
clip
construction
cover
durability
fix
lighter
lower
mount
nuts
pre
profile
removed
replaceable
stainless
steel
stock
tank
term
ultimate
usability
week
weight
EDIT:***ALL SOLD***
Bought this bike with only 800 miles on it. Everything looks fantastic. The forks and rear shock were swapped out for the race ones about 500 miles, so they are like new. Shipping will be based out of 75025 DFW area. Not everything is pictured.
Front Forks - $ 400
Rear...
hello, I'm the owner from TW
my bike is 2017 RC390,
I saw the 2017 R390 lower triple clamps number :[9010103210033]
and Duke 390 BOT. TRIPLE CLAMP CPL number:[90101032100]
my RC390 lower triple clamps has been broken , I saw second hand Duke390 lower triple clamps on net
can I use...
as title ,
my bike is 2017 RC390,
I saw the 2017 R390 lower triple clamps number :[9010103210033]
and Duke 390 BOT. TRIPLE CLAMP CPL number:[90101032100]
my RC390 lower triple clamps has been broken , I saw second hand Duke390 lower triple clamps on net
can I use the Duke390 lower...
I am trying to use a head lift, but I'm not sure where the pin goes. Am I missing a part on my bike? I can't seem to find a reference to a part that belongs under the lower triple clamp. Thanks for any help.
I'm an idiot. Its a plug. I don't need any help thanks and sorry...
I have some parts leftover form my buy-back:
Stock lower
rear fender
passenger pegs
tail/plate bracket
owners manual and ktm folio
replacement body work bolts
front axle bolt
sparkplugs
oil filters
It's also time to sell my aim mychron lap timer and beacon as well.
Make me an offer
Hey guys,
As title says, any members in BC or more specifically the Lower Mainland? Just picked up a used 2015 RC last week, would be great to get to know folks around these parts in anticipation of rides in the spring. I'm downtown Vancouver.
Alex
Just a random thought. Fan is Ecu controlled, so ktm knowing about all the head gasket issues should do an update on the PCM to lower the temp at which the fan comes on. Seems like a super simple fix. Drop the fan temp on time to 90 deg or something. Maybe that would aid in the longevity of...
Stock unit
I have been modifying and looking for more gains with the engine kit! I lightly blended the bore, cleaned up/radiused shaft and tapered throttle plate on first iteration.
Dyno data was collected same day back to back on stock throttle body to modified one. Found over a horse...
body
bore/casting
cfm
cleaned
data
dyno
increase
inline
kit
lower
mod
offering
plate
profile
restrictor
result
screws
service
stock
stuff
t.b
throttle
transitions
tuned
up/smoothed
I bought a set of case savers from a member here last winter..... I bought a 2016, and figured they wouldn't change the cases for 2016.... It turns out I was WRONG!!!!! They changed the left side case slightly for 2016 (confirmed a different part number today). These case savers will work on...
300mm KTM PP rotor.
Used only 3 weekends. Normal wear. Switched to 320mm rotor, so I don't have a use for this.
$200 shipped in the lower 48 paypal as gift.
Sorry the header is incorrect, and I am not able to edit or delete the original posting.
Anyone know the torque specs for the upper and lower triple clamp bolts? Just got forks back after Andreani Kit install and need torque specs. If you need a very good suspension guy go to Kent at GMD Atlanta.
About Us
Will be there helping out 2 new KTM cup riders and others. look for number 102 Josh Jovi and 416 expert should be down on lower level. Come over and say hi My name is Charles but known in the Paddock as Huffdaddy"
Forum member Fasteddy has been on us for a while to put these out, and we've finally finished them up...
These 6061 hard anodized billet spacers install cleanly under the stock mirror, putting them in a position for a much cleaner viewing angle (lower and wider) on the sight challenged RC...
I did my first oil change and three screws on the lower cowl were cross threaded when I tried to remove them! I had to tap out the treads and buy new screws/bolts from Lowes. I'm not impressed by this, did the factory install the cowl or the dealer? Otherwise I'm happy with the bike, but it does...