sag

I only ride my RC390 on the street but felt chatter from the stock Metzlers riding hard in Arkansas. I put Bridgestone 020 Evo front and rear. I’ve put rear tires on about 20 different bikes in my life but was unable to get this rear to accept the brake pads. I finally gave up and am riding it...

Quick question: I just switched the springs in the front. What sag numbers am I looking for? Right now it seems a little stiff with about 33mm of sag (no gear) 13mm static sag with about 13mm of preload. Any tips? I think I am going to take out 10mm of prelaod and see how it feels. Edit: I...

Hey! i have finally finished putting the bike back together and tomorrow is my First track day on the RC. I spent years getting my R6 dialed in at the track and am looking for a good starting pioint if anyone has any? what have you set you sag to? i think i always set it to 32m front and rear...

I've read every suspension thread on this forum and the Duke 390 forum along with some posts on other suspension forums and I'm still not sure where to start with rear sag on my YSS MZ456-300TR-38 shock due to conflicting recommendations. There are many other variables that we don't need to...

Im exploring other setups for a test. No right or wrong as the setting will depends on your own riding style. Please share the following info as well 1) Estimated rider weight inclusive of racing attire 2) Fork: Std or Adreani kit or etc 3) Fork Spring: Std or changed 4) Shock: Type of shock...

I'm getting a static sag of 35mm in the front and 15mm in the rear. Rear spring preload is on the 5th setting. Rider sag is 50mm in the front and 35mm in the rear. Rear sag seems about right to me, but front sag definitely seems WAY off. is a static sag of 35mm normal?

Ok, so the debate has been does the heat from the exhaust affect the rear shock. I needed to check my rider sag anyway so i decided to do a before and after. w my trusty 12 yr old assistant (my son) on the measuring tape heres the results. Now, let me start by saying i weigh 185lbs. I had...