Well, a nice end to the racing season- 9 laps at the second position and then 1 corner before the finish line the bike shuts down with an awful noise so my kid literally pushes the bike over the finish line for the last 50m. Damn Yamahas claim another 2nd position due to KTM inability to last until the race end.
Dismantling the engine you can see the content below- what a shitty welding work done there where literally 1/3rd of the welds intended to support the fixing rives are not even welded metal together and the remaining ones are less than adequate for a rotor going 10k RPM.
So word of warning, at racing use at lest, this part should better be over-welded by professional with TIG.
Dismantling the engine you can see the content below- what a shitty welding work done there where literally 1/3rd of the welds intended to support the fixing rives are not even welded metal together and the remaining ones are less than adequate for a rotor going 10k RPM.
So word of warning, at racing use at lest, this part should better be over-welded by professional with TIG.