Recent content by RedWinter

Thanks. Two tubes of blue and one of red. Already lost a a bolt here and there. Have bags of bolts now the conversion to track duty is done. The front suspension are Bitubo cartridge kits. On my shakedown run around the neighborhoods I noticed my lap timer wasn't tracking my RPM quite right :-(...

Still new to bikes and new to track riding but decided that what I wanted to do in 2018. So...... Picked up that 2016 RC390 from our favorite St Louis dealer on super clearance, twas comically dusty. Then spent the winter tearing it apart and slapping the good stuff on it. Many thanks, mostly...

Found it! There is a plug that goes into another that is wired to the ignition coil. The wire matches the wiring diagram from the repair manual, it's the black wire next to the white and orange one. Spliced it into the GPX Pro 4 lap timer brown wire and viola, RPM!!!!!! Grabbed a ram mount to...

Team, Not 100% which wire is the right to tap into for getting Tach data to my GPX GPS Pro 4 Lap Timer? Also not comfortable trying to interpret the wiring diagram. From what I have read online versus the wiring diagram I am now confused what line to tap. The red clips in the picture are what...

Just completed this operation. Received the spiegler ABS bypass lines from KTMPerformance because I am setting the bike up for track only. With the ECU flashed to the Akra map the ABS error won't occur. It was quite a task but not all that bad truly. The new brake feel is incredible. As a novice...

Just ordered mine and got it installed, seems just right. Thanks BTW on the 24mm hex socket, was the right size.

^ This! That being said with my Tyga parts I've made sure to order extra pegs, shift/brake levers, etc... just anticipating those few things under my reasonable control.

And for a weird attempt at strange shape vinyls.

Got my 2016 nearly ready. Exhaust, PC, K&N and Bitubo cartirdges and K-Spec rear installed by a shop, lots of other track bits pending my first service. Race fairings painted white and black from a buddy ready for install, final pics to come closer to track days. Went for a ride and got a low...

Great post and congrats on the weekend dead-last or no it's still an accomplishment to have raced. Hope to get lucky and brave enough myself to try at it as well. Also inspiring to see the support received to get a rider and bike out there.

Zarco Replica brah! Shark Race Pro R or somesuch...

Ha! I was there and saw this race in person. Watched the pitt stop for gas and Cam losing his visor. Great seeing the video to put the whole race together. At one point from a spectator's view it looked like all three of you were side by side through one of the last turns. That was a great weekend.

Looking for OTD price or the dealer fees as part of the purchase price? My dealer gave me an OTD price and then adjusted the real sale price down on the bike to accommodate for their fees (so a technicality). So on paper I got a 2016 left over for $3400 before dealer fees. PM me and I can share...

Can't answer your questions but noticed in the description of the 320MM rotor from KTM Performance they not including the spacers for the rotor's they sell. If nothing else perhaps shoot them an email? KTM Store :: KTM Street Powerparts :: 390 DUKE :: Brakes :: KTM 390 WAVE BRAKE DISK 320MM KIT...

There are a lot of OEM RC390 parts on ebay right now. Ideally, when you are shopping for the stock 2015-2016 exhaust components and lower fairings you can score deals on there. Flipping my 2016 into a track bike so my bottom fairings are already off as well as stock muffler. Any trouble finding...