=maz=
Member
I was doing some work on the bike which involved stripping everything off.
I noticed something didn't look right with the left-hand seat-mount tab on the frame.
On closer inspection it had cracked through the small hole and along the weld-seam for the nut/thread...broken rather than cracked.
This prompted me to go and have a look at the other 2015 sitting in the shed...sure enough there is a crack through the exact same section.
I would suggest that the welder got things a little hot and they became brittle
I noticed something didn't look right with the left-hand seat-mount tab on the frame.
On closer inspection it had cracked through the small hole and along the weld-seam for the nut/thread...broken rather than cracked.
This prompted me to go and have a look at the other 2015 sitting in the shed...sure enough there is a crack through the exact same section.
I would suggest that the welder got things a little hot and they became brittle
Last edited: