I'm seeing 47mm, 50mm, and 51mm anyone know which is correct?
I measured and it looks like 50, but it wouldn't be hard to be off by 1 mm.
It's for a 2017, but I don't think it matters.
Thanks,
Mike
Looking to get wood craft clip ons that will be around the same height as the current bars.
Anyone know if I should get 1 or 2 inch risers?
Thanks,
Mike
I am installing driven clip on. I am missing the pin on the throttle side that connects the start-stop switch to the clip on. Any body knows type of the pin and length and diameter of the pin. Can I get it from a hardware store?
Also, is the pin on the clutch side switches the same as throttle?
Introducing our first designed and developed in house product! The simple and subtle rear tank mount! No its not much and won't make 15% gains like our air tube but it does make life easier. I was tired of having to pull the fuel tank to clean my air filter so I made a fix, this bracket is that...
air
box
bracket
clip
construction
cover
durability
fix
lighter
lower
mount
nuts
pre
profile
removed
replaceable
stainless
steel
stock
tank
term
ultimate
usability
week
weight
Hello all, On the left side fairing the carbon filter is attached with a rubber clip. I have looked everywhere I can online and can not find how to route the drain hose with the plug and metal clip on the bottom of it. Currently I have it going down the fairing through the metal holder that the...
What is a good way to setup bar position. Right now, it too a lot of fiddling to get everything to clear and my bike is great. I wanted to try to put on a radial MC, and there is absolutely no way it will clear the fairing or the stock fairing stay. I am using PSR clip ons at the moment. How...
So I am not crazy about the height of the stock handlebars and want to put clip ons on to get a racier position. From what I can see the lowest I could go with true clip ons would be about an inch because the throttle cables will hit the fairing ,I wonder if that little bit will make a...
Hello
I had the feeling that my right handlebar is slightly bent, following a low speed fall on track. Nothing serious.
Then I looked in parts catalog, and I extremenly surprised by the comment :
I did not know that 2 models of triple clamp and handlebar are existing, and that the handlebar...
Saw that on my fb thought I will share it here
https://www.facebook.com/tygaperformance/posts/1193444960685740:0
Doesn't say what the price may be though.
I installed the Vortex clip ons on my bike and am having an issue with the throttle cable hitting the body work. Has anyone else had this problem? What did you do to fix it?
Hi guys, for those who are planning on buying the Chinese clip ons for your RC390s do not buy the ones with the 1" rise, as it will cause an interference issue with the top triple. I had to cut mine and add 1/2" spacers to make them work. Too much work involved and it's still not perfect...
Well i finally got around to changing my oil for this up coming track day and well ive been dragging the belly lol..although impressive guess i will be looking into the race belly is Tygra a good fit?
also i was putting on my new renthal grips and noticed what seemed like a ton of room between...
Is there an aftermarket top triple clamp available anywhere ? Looking to replace it so it will not interfere with aftermarket clip ons. I'd rather not grind the stock ones down