AryanWinters
Member
I'm running into an issue with my aftermarket cheap chinese cnc clutch lever, even when I pull the lever in all the way in 1st gear with the engine off, I'm noticing the bike rolls forward but there is an obvious amount of tension with rolling the bike forward as if the clutch is not disengaging fully.
With my stock clutch lever, if I was in 1st gear, when I pulled the lever in all the way it rolled forwards as smoothly as being in neutral. However after the installation of these cheap chinese aftermarket cnc adjustable clutch levers I can feel even when I pull them all the way in it feels as if the clutch is still slightly engaged still and doesn't roll forwards smoothly. I made sure absolutely everything was assembled properly, I did not over tighten anything and the slot for the clutch cable on the lever is in the exact same place as the stock oem lever so I'm really not sure why this is happening. I've tried to adjust the tension for the cable to all the way out, all the way in, and its not making any difference it still feels as if the clutch is slightly engaging preventing the wheels from rolling smoothly.
Just to be clear I only got these to see if I even like these style of levers, I'm going to order the Puig 3.0's but before I spend $230 on them I wanted to see how I felt about aftermarket levers so I bought these aliexpress levers for $20.
With my stock clutch lever, if I was in 1st gear, when I pulled the lever in all the way it rolled forwards as smoothly as being in neutral. However after the installation of these cheap chinese aftermarket cnc adjustable clutch levers I can feel even when I pull them all the way in it feels as if the clutch is still slightly engaged still and doesn't roll forwards smoothly. I made sure absolutely everything was assembled properly, I did not over tighten anything and the slot for the clutch cable on the lever is in the exact same place as the stock oem lever so I'm really not sure why this is happening. I've tried to adjust the tension for the cable to all the way out, all the way in, and its not making any difference it still feels as if the clutch is slightly engaging preventing the wheels from rolling smoothly.
Just to be clear I only got these to see if I even like these style of levers, I'm going to order the Puig 3.0's but before I spend $230 on them I wanted to see how I felt about aftermarket levers so I bought these aliexpress levers for $20.