Keyless ignition

[mcsahib]

Have anyone did the keyless ignition with the stock control pod? or I have to get the R1 or the cup bike control?

 

[Fasteddy]

There is a thread some where on here that shows how to convert with stock control...

 

[mcsahib]

keyless

Hi Fasteddy,

Can you point me to the thread? I do a search and only find the thread that use a R1 control.

There is a thread some where on here that shows how to convert with stock control...

 

[Fasteddy]

http://www.rc390-forum.com/forum/electronics/752-keyless-ignition.html

I was sure it was DCMoney, searched for a while never found it, then I saw the tittle in your post 'keyless' bingo! first try...

He has it very well documented.

OOPS! this is the R1 switch, never mind...

 

[Fasteddy]

From taking a look at the wiring diagram it looks like it would be simple enough to connect the gray/blue and gray/red wires that go to the kill switch together and then connect the key switch wires, white/black and brown/blue to the control switch. all the current load pretty much goes through relays and either switch kills fuel pump ignition etc.

 

[Tdel]

I have removed the key cylinder from my cup bike. The base is a rotary switch that can be removed which I placed in the on position then covered with a plastic bag and electrical tape. Now the kill switch turns the bike on or off.

 

[Calani]

https://streamable.com/9r07

 

[Tdel]

Edit, when key is in on position even with kill switch off there are relays energized.