HardRacing
Supporting Vendor
.
So we have finished our Plug-n-Play LED Headlight Package that has 1 on Low, and BOTH on HIGH. (like the rest of the world has. )
Works great.
Looks Great.
The LED Headlights are so much brighter then stock of course.
Right now, we are currently just putting it through the paces, to make sure no issues.
Question is.........
The (4) Plugs, and wires..... what to do with them. There just isn't enough room between the Two Bulbs to stuff the wires in there.
So the options are (this will require you to go look at your bike to understand)
(1) Run the wires and plugs up above in the Space below the Dash. It's a huge amount of wasted space................. BUT........ you could see it looking through your windscreen from the Front. Some guys may not like that..?
OR
2) There is a small plastic shelf above the Radiator......... could mount them in there.
OR
3) We make a nice Plastic cover plate that screws in underneath the Front Fairing , ... it would be triangular shapped, mounts OEM using the OEM Screws... that acts like a little storage shelf. ... BUT this would add some cost.
OR
4) Just ziptie them under the Front Fairing and call it a day...... - Least Desirable.
Again..... please try and look at your bike, when you read this, so you have a good idea of what we are talking about.
Opinions ?
.
So we have finished our Plug-n-Play LED Headlight Package that has 1 on Low, and BOTH on HIGH. (like the rest of the world has. )
Works great.
Looks Great.
The LED Headlights are so much brighter then stock of course.
Right now, we are currently just putting it through the paces, to make sure no issues.
Question is.........
The (4) Plugs, and wires..... what to do with them. There just isn't enough room between the Two Bulbs to stuff the wires in there.
So the options are (this will require you to go look at your bike to understand)
(1) Run the wires and plugs up above in the Space below the Dash. It's a huge amount of wasted space................. BUT........ you could see it looking through your windscreen from the Front. Some guys may not like that..?
OR
2) There is a small plastic shelf above the Radiator......... could mount them in there.
OR
3) We make a nice Plastic cover plate that screws in underneath the Front Fairing , ... it would be triangular shapped, mounts OEM using the OEM Screws... that acts like a little storage shelf. ... BUT this would add some cost.
OR
4) Just ziptie them under the Front Fairing and call it a day...... - Least Desirable.
Again..... please try and look at your bike, when you read this, so you have a good idea of what we are talking about.
Opinions ?
.