bolts

. Finally got some more of these kits back in stock. - 320mm Galfer Front Wave Rotor - Mounting hardware kit (20mm Caliper Spacers, and 70mm Caliper bolts) Limited Supply. >> GALFER OVERSIZED WAVE ROTORS << .

Hi all, So not entirely new but first time posting about the bike. Not much done so far other than trying to get to first service. Ive added the KTM levers and racing screen. Those made a huge difference to the bike. Also added the JRi double rear shock. That one pretty much happened a week...

Approx 1000 miles on new bike...today noticed sidestand seemed loose when we stopped for a bite. Crawled under for a close look and discovered the two bolts that mount it had backed waaay out allowing the entire stand assy to have lots of free movement. Luckily, the tool bag had the right...

Figured I would start a thread for those of us without a service manual. Post up here with requests and when someone answers i will update the top post. Swingarm Bolt: 103.3lbf ft Rearset Bolts: 33.9 lbf ft Steering Stem Nut: 38.4 lbf ft Triple Clamp Bolts: 8.1 lbf ft - double check this one...

Hi guys, I'm a new owner of a KTM RC 390. I'm in love!!! I have a little question... I removed the rear pegs. I just want to know, what is the right bolts size to replace the original ones? Because, the original bolts use for the pegs does't fit now. Meanwhile, I covered the holes with tape to...

Does anyone know how to remove the factory bar ends? I've taken the bolts out but how do you remove the insides?

Can anyone please confirm that the Duke's tank cap is the same as the RC390? I know the tank itself is about a liter off but after comparing a picture of the Duke's tank cap to my RC they do look identical with both having the 7 bolts in the same location Reason: As well all know the Duke...

I Just got finished doing the first service and when I was taking the two bolts out of the right side mount that goes into the muffler under the exhaust outlet I immediately noticed they were not the same and one of them had a spacer on it. I noted which came from where but am wondering if...

There's been a lot of speculation on the RC390 and I have my hands on one in the US (I imported it for race purposes). It was supposed to be here in November, but due to some problems finding a shipper... well, it's here now. I have yet to actually ride it as it has been snowing & cold in...