Awesome!
- Thread starter Wa2fst
- Start date
-
- Tags
- cartridges completed jri race windshield
mr-fabricator
New Member
Rearsets and race seat +belly pan for clearance ,
Loose as much weight as u can from the bike and stick some proper rubber on . Then its a tune and u should have a very capable bike ..
Loose as much weight as u can from the bike and stick some proper rubber on . Then its a tune and u should have a very capable bike ..
micahpearlman
New Member
GP Cartridges
Penske 2 way
Akro exhaust
PP Rear sets
PP screen
PP belly pan
Tygra seat
Powetronic ecu
Super Corsa tires
Vortex clip ons
Sent from my iPhone using Tapatalk
Penske 2 way
Akro exhaust
PP Rear sets
PP screen
PP belly pan
Tygra seat
Powetronic ecu
Super Corsa tires
Vortex clip ons
Sent from my iPhone using Tapatalk
Last edited:
micahpearlman
New Member
It's an Indian made ecu. Quality seems good but I've been a little concerned on how it determines load (using the injector PWM signal) plus it doesn't deal with the closed loop circuit (anything below 5k
RPM) that I will likely get a PCV and spend my dyno money on getting that setup.
Sent from my iPhone using Tapatalk
Look at PCV testing thread under our sub-forum! Huge gains especially with pipe, K&N, and open air lid
What I have changed out? Uhhhmmmm....might be easier to list what hasn't been changed yet...
Most likely forgetting some things...
-> WP racing forks
-> WP racing shock
-> PP rear sets
-> PP racing windscreen
-> PP belly pan
-> PP rear fairing
-> PP folding clutch lever
-> PP folding brake lever
-> PP clutch lever guard
-> PP brake lever guard
-> Akrapovic exhaust
-> Power Commander + Map
-> Quick shifter
-> FF Racing Captive spacers front and rear
-> FF Racing Rear Axle pull cup
-> ABS removal
-> KTM Performance shift kit
-> KTM Performance brake lines
-> Throttle kit
-> Alien Motion Lithium battery
-> K&N filter
-> Modified airbox
-> Piston
-> Cams
-> Head gasket
-> Base gasket
-> Timing chain tensioner
-> NGK plug
Here is the funny thing...I don't even race yet...and yes...people have told me I have issues...
Most likely forgetting some things...
-> WP racing forks
-> WP racing shock
-> PP rear sets
-> PP racing windscreen
-> PP belly pan
-> PP rear fairing
-> PP folding clutch lever
-> PP folding brake lever
-> PP clutch lever guard
-> PP brake lever guard
-> Akrapovic exhaust
-> Power Commander + Map
-> Quick shifter
-> FF Racing Captive spacers front and rear
-> FF Racing Rear Axle pull cup
-> ABS removal
-> KTM Performance shift kit
-> KTM Performance brake lines
-> Throttle kit
-> Alien Motion Lithium battery
-> K&N filter
-> Modified airbox
-> Piston
-> Cams
-> Head gasket
-> Base gasket
-> Timing chain tensioner
-> NGK plug
Here is the funny thing...I don't even race yet...and yes...people have told me I have issues...
Last edited:
The bike is still being built and it currently has one of the prototype units in it for final product testing and for dyno mapping...
micahpearlman
New Member
You have a link to the ff racing quick change axle?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
It's just the axle pull cup for now: http://shop.fastfrankracing.com/Rear-Axle-Pull-Cup-RC04.htm
Frank mentioned he is looking into the quick change for the rear though...
