Hi Guys, I have pirelli diablo II on my bike, but lately the rear end has been slipping and sliding, my pressure is good at 29psi, and I still have plenty tread. Anybody else experience this? Any suggestions appreciated
Context: I have 2017 KTM RC 390 with Dunlop Q3+ and Puig metal valve stems (https://www.revzilla.com/motorcycle/puig-90-degree-valve-stems). I use Woodcraft tire warmers and run 32-33 hot in the front and 26-29 hot in the rear. I have done more than 20 track days with two sets of Dunlop Q3+ and...
New rider and I’m out of my element when it comes to bike issues. I recently did my first service on my 2015 RC 390, I used 1.75l of oil and changed the filter. Ever since my first service my low oil pressure light keeps coming on but only when the bike is up to temperature. I didn’t have this...
New rider and I’m out of my element when it comes to bike issues. I recently did my first service on my 2015 RC 390, I used 1.75l of oil and changed the filter. Ever since my first service my low oil pressure light keeps coming on but only when the bike is up to temperature. I didn’t have this...
Seems lately that I have excessive pressure in the tank when I stop to fill up with gas. I've checked the vent hose and overflow hose all are clear and not kinked. I did notice that within the cap itself their seems to be vent or something. You can see a half moon rubber seal with a hole in it...
2015 KTM RC 390 OEM slipper clutch upgrade cheap
Purchase a clutch pack from a 2016, 2017, 2018 KTM RC390 or Duke 390 (inner clutch hub, friction and steele plates, washers, everything but the clutch basket. You should also get a new gasket for the clutch cover.
USED OEM KTM DUKE/ RC390...
Hello Guys,
Recently, I have a problem with the oil pressure.
Last week, I rode my RC390 (2015) for 150 km, and went to the gas station to fill up the tank. After filling, I rode for 1~2 minutes, and the low oil pressure showed. (My bike's odo is 19000 km)
I turned off, and re-started the...
I'm running an aftermarket tank on a custom RC390 with an external adjustable fuel pump and regulator. I'm running the pressure at 50psi right now because I had read that was stock but I just stumbled upon something that said 2.7 bar which equates to about 39psi. So I was hoping someone on here...
Made these videos last weekend and have since figured out the low oil pressure problem on my new motor thanks to help from Chad at Welcome to KTM Performance (I forgot to transfer the oil jets to the new clutch cover)...
Before low oil pressure warning...
Hey guys this is my first post here .I was thinking of making a Quick Shifter for my bike using a pressure sensor and the widely used micro controller Arduino uno .The pressure sensor will be attached to the gear lever .This is how i want it to work ,When the pressure sensor on the gear lever...
.
Our Shipment finally arrived today.
Most of us feel the Rear shock is really lacking.
Upgrading to an aftermarket shock is a HUGE Upgrade.
The Ohlins KT303 finally arrived. And we sold through a large majority of them already.
But, we still have a few left in stock.
We can even BUNDLE...
Maybe this is common sense and I just missed out, somewhere. If so, I apologize if this seems stupid to anyone.
Last weekend, I was doing an oil change and was also going to clean/lube the chain while everything was easily accessible. After doing the oil change, I started up the engine to let...
Hi All,
On the frame sticker on my bike it says 29 psi front and rear. The max psi is 42. The current psi is 33 from the dealer. What do you recommend I keep the pressure at?