Stock unit
I have been modifying and looking for more gains with the engine kit! I lightly blended the bore, cleaned up/radiused shaft and tapered throttle plate on first iteration.
Dyno data was collected same day back to back on stock throttle body to modified one. Found over a horse...
body
bore/casting
cfm
cleaned
data
dyno
increase
inline
kit
lower
mod
offering
plate
profile
restrictor
result
screws
service
stock
stuff
t.b
throttle
transitions
tuned
up/smoothed
I am talking to a manufacturer about possibly making a 415 or 428 chain/sprocket kit for the RC 390. He said that we would need to get at least 20 people to buy in to justify the work and that the 415 kit could take a few months to produce. They could possibly get a 428 kit made up sooner. I...
Hi fellow riders,
I might be needing a new clutch kit. Please advise me on where to buy the OEM parts for my 2015 RC 390 (not slipper clutch).
The story: Only after a few thousand miles my clutch starts slipping at high revs. I tried adjusting the cable at the lever and engine however I...
.
Finally got some more of these kits back in stock.
- 320mm Galfer Front Wave Rotor
- Mounting hardware kit (20mm Caliper Spacers, and 70mm Caliper bolts)
Limited Supply.
>> GALFER OVERSIZED WAVE ROTORS <<
.
I'm pleased to announce a new product for the Formula390 lineup. This is a frame mounted RAM mount setup. The frame mount utilizes our frame clamp setup from the steering damper, but instead uses a different pin which accepts a RAM Ball. This allows you to mount whatever devices you want, to a...
.
As most of you know everywhere else in the world, the RC390 comes with Nice LED Turn signals on the Mirrors.
So we wanted to do something similar.......... But better.
Many of you probably see more and more cars are going the way of AUDI's and coming with LED Daylight Running lights...
amber
cars
coming
daytime
drl
feedback
flashes
kicked
kit
ktm
ktm 390 led signals
led
lights
mirror
mirrors
nice
package
rc390
running
signal
signals
similar
switch
time
world
.
So this project kept getting pushed back because of other products.
But, we've got it all squared away.
With LED Lights, and the Plug-n-Play harness, now the Lights work just like nearly every other bike on the planet.....(1) Headlight LOW Beam and BOTH ON HIGH Beam.
Not only is the...
Could someone post part# of what they needed to get their RC off the ground? I assume I need a front and rear stand. Beyond that do I need to get an adapter kit to connect with the stand? Cycle gear or Ktm Powerparts?
.
After weeks of rain, and rain and more rain... we finally got some good weather and were able to complete our Brake Testing.
So prior to doing any brake upgrades, we went out and tested the STOCK brakes.
Tire pressures were all checked, brakes were seated w/ plenty of pad material...
We have been in the works with Yoyodyne to produce an aftermarket slipper clutch for the RC390 and 390 Duke. Yoyodyne's slipper clutches will retain the factory fibers and steels. Extreme High quality. These should be ready in about a month and we have the first 10 exclusive to us. We would love...
.
Parts arrived.
Should have some time this weekend to do VIDEO Install and Review.
Sexy Stainless steel plate with Stainless hardware , and a Bright LED Tag Light.
Too keep the cost down, the kit utilizes your stock signals.............But, we will be offering Short Stalk Signal Upgrade, if...
.
Well as many have been wanting, there's a steering damper now offered for the RC390.
GPR Just sent us a press release for a the RC390
We've got them on order...... hopefully should be arriving soon.
We will do video review and writeup once we install on our RC390 Project bike.
BEST...
My kid and I chose the rc390 for his first bike - he loves it...very cool bike. In 6 weeks of ownership he has put on over 5000 miles and the clutch is starting to go. At about 2000 miles he mentioned it was slipping a bit so we adjust the clutch (using cable adjuster). I showed him how to...
.
Yoshimura Fender Eliminator Kit for KTM RC390
IN STOCK !
It will transform the tail of your bike to make a much nicer, cleaner look.
FEATURES:
- Laser-cut stainless steel bracket tucks discreetly under the tail section of the motorcycle
- Black anodized CNC machined light housing with...
I'm selling a new 390 RACE graphics kit. I bought it at my local dealer for $120. I used the kit to scan the shapes so I could have my local sign shop make a custom decal kit. So, the package has been opened, but the parts are all there. Bonus: KTM included decals for both the stock and race...
Hi Guys,
Quick question.
Does anyone know if the RC390 steps are compatible with the Duke 390?
Looks like they'll bolt straight on, but as we don't have a bike, and can't get hold of one locally, I thought that I'd ask to see if anyone had done such a thing, or knew the answer.
Cheers,
Matt.
I have 10 units on the way, shipped yesterday. I will have on hand and ready to ship this Friday(7/3). Hurry and buy now before they're gone! First 10 production units, only place to get them. Next batch will be a bit, other places don't/won't have them. Retail is $449, selling for $430. PM me...
Steffen from Rhinomoto and I worked together to come up with a solution for bar end mirror adapters for the RC 390 since I realized there is a great lack of screw-in bar end adapters on the market for our bikes. He was awesome to work with and I recommend you shoot him an email...