Caliper bolts upgrade

[GOJO]

Bought some 75mm pro bolt titainium race spec drilled caliper bolts in m10 and machined them down to M8x1.0 by 70mm length to suit left a 10mm collar at the top of the bolt to help with strength so needed to drill the top of the caliper a little to suit. The ones that come in the 320 upgrade are dissapointing

 

[simpletty]

View attachment 3057
Bought some 75mm pro bolt titainium race spec drilled caliper bolts in m10 and machined them down to M8x1.0 by 70mm length to suit left a 10mm collar at the top of the bolt to help with strength so needed to drill the top of the caliper a little to suit. The ones that come in the 320 upgrade are dissapointing

The bolts that came with the rotor were not great, I ended up getting some hex heads from the local supply store. Still need to get them drilled yet